Ultimate wheel fitting guide

Wheels: 350Z Track wheels
Size: 18"
Offset: +30
Tyres: Front 225/40/18 Rear 245/40/18
Spacers: No
Suspension: Stock
Comments: Fronts clear eazy,Rears Scrape on bumps heeps!!!!!!!! But looks sick

My old setup


Wheels: Volk TE-37
Size: 19x9.5-F 19x10.5-R
Offset: +12
Tyres: F - 215/35/19, R - 235/35/19, Falken FK-452's
Spacers: none
Suspension: Fortune Auto Coils
Comments: Front and Rear fenders were rolled and have a small pull

seen your can a few times in pics, I think on zilvia as well. Looks great.

just pick up a set of rims for the s15
Work VSKF's 5x114.3 18 x 10.5 +0 and 18 x 9.5+14

running overfenders in the rear?

roll n pull

i had a 10.5 + 12 in the rear, we spent 2 days doing the fenders and the 10.5 +12 in the rear was cutting it

but good luck

what was your camber in the rear?

not sure what it dial in but maxed out as far as stock would go

Vehicle: Nissan S14
Wheels: Work Meister S1 2P
Size: 18x10 F/R
Offset: +20
Tyres: Archilles 18/225/40
Spacers: 13mm slip on up front to clear strut
Suspension: BC Gold Maxed front, Rear 10mm away from lowest.
Comments: Front guards rolled, rear rolled and pulled 15 - 20mm.. Rear can run nearly 0 degrees camber , front is at -2.5, -3 would be ideal for to clear guards.. Front requires less castor in the front left to stop rubbing and maybe higher preload and damper setting to stop it bottoming out.

Wheels: Sparco racing NSII
Size: 17x9
Ofsett: +22
Tyres: Falken FK452 225/45/17
Suspension: Driftworks CS2 coilovers, standard arms. -2 front camber, -3 rear camber (stock arms maxed out)
Comments: Rears had the lip rolled flat, and have got about 8-10mm space when the wheel is tucked up into the arch, but will be less when I get rear camber arms to correct it. Front is standard. No scrapes Car is moderatley low, pictures to follow

hi guys im looking at this wheel choice, can people please tell me what exact widths and tyre size i can use without having to roll the arches? Im looking at parada spec 2s and an 18inch rim.

And dont worry about the wheels saying 4x100 as u can get these made to your exact specification (as far as ive been told?)

http://www.rarerims.co.uk/alloys_sub2.asp?id=82

Spec S S15
Spacers: none
Suspension: Driftworks CS2's
Comments: standard arches

Wheels: Work CR Kai
Size: 17x8JJ ET 32 Front and 17x9JJ Rears ET 30
Tyres: Hankook Ventus 215/45r17 front and 225/45r17 rear



Wheels: Work CR Kai
Size: 17x9JJ ET 17 all round
Tyres: Toyo R888 225/45r17 all round
Comments; stripped the front wheel arch liner on the drivers side but no other issues (only used on a clockwise track - not on the road)




Wheels: Nismo GT4
Size: 17x7.5JJ ET 30 Front and 17x8.5JJ Rears ET 40
Tyres: Hankook Ventus 215/45r17 front and 235/45r17 rear

probably getting my hands on a good set of avs model5:

18x9 et +10

I'm only concerned on how much would they stick out. I'm running oem guards and tein super street. am I going to have any steering issues?

They wil stick out haha, camber them in! roll and pull.

sparco racing nt

hi guys..

i was wondering if these sparco racing nt would fit nicely to my car

F: 17 x 8 +32
R: 17 x 9 +33



http://img151.imageshack.us/img151/8697/aaaoh1.jpg

Hi guys,have found some wheels I really like just not sure if they will fit.they are 18 x 9.5 ET35 all round,I have full set of adjustable arms on the car and tein super streets with pilLo ball top mount,do you reckon these will fit????
They are wheels only so will need tyres too any suggestions on size?
Any info will be grately received

Wheels: unknown
Size: 17x8.5
Ofsett: +35
Tyres: 235/45/17
Suspension: Standard
Comments: Currently running

And I have just got!!

Wheels: Rota GTR
Size: F 18x8.5 R 18x9.5
Ofsett: F +35 R+30
Tyres: F 225/-/18 R 235/-/18
Suspension: Standard
Comments: Not on any tyres at the moment but I was suggested the width by DW. Don't know how critical the aspect on tyre is but was told by ProTyre R 40 and F 35 and sort of told this is BAD

front 225/40 and rear 255/35 this is a nice fitment without too much stretch