turbo

  1. LeddersD

    Got the Bodykit on

    Well it's taken a bit of time till the weather has improved etc. but 7 months later the original 2nd hand JDM aero parts have been prepped and painted and attached. Screwed in at the bottom and taped in the middle. Very happy with the sourcing of the skirts from Mitch, who I met in a car park in...
  2. Mycool

    WTB: T28

    Looking for a t28 turbo. Best condition as pos
  3. FreakensNL

    Stock high rev boost creep? 0,6->1,0bar

    With open waste-gate still 14 psi Update: with waste-gate tied open I still get 7psi @ 4k rpm, than goes to 14psi till redline... https://youtu.be/HyHDuydxjlM Problem is i am running stock tune, so @ 14psi i'm seeing AFR's of 14.5 (between 3.5-4,5k rpm) AFR at high rev's is good, 11 a 12...
  4. TrevorSpencer

    Turbo flutter

    First of all, Hello from British Columbia Canada, first time posting here. Secondly i searched before posting so i apologize if there was a post previously and i missed it. So i was wondering if you guys and or girls have used a Greddy RZ bov before and if you ran into turbo flutter from...
  5. FreakensNL

    lose connectors?! 3 not connected

    anyone got a idea where these are for?? removed alarm and turbo timers and what not... location: fusebox next to throttle
  6. JDM_virgin

    what nuts to use on dump pipe

    Morning guys and girls, here is a question for you. Was driving home last night and my exhaust began to blow so i assumed it would be a cracked manifold or part of the dump pipe, however upon inspection what i found was that all 5 (!) of the nuts i used to bolt my dump pipe to the turbo had...
  7. Floyd

    Another turbo banana..!

    Hey guys, Names James, bought this s15 from Andy (drift works mod) just over a year ago..! Been hanging around SXOC a while but thought its time I show my face around here :P Most interesting part is it was originally a Spec S, and converted by the owner before Andy to a spec R (6...
  8. S

    WTB: s15 sr20det complete setup...

    I currently have an extremely good condition spec s and I'm currently looking for an s15 spec r engine to swap in. I'm not fussed about the transmission as it's a 5 speed manual already. Ideally the engine will have all the ancillaries including loom, ecu, turbo, manifold etc... The reason I'm...
  9. NICKO

    FS: S15 Goodies inside!!

    Up for grabs are bits from my S15 :nod: moving on to bigger top mounted goodness so want this stuff out the way :D First up is a Horsham developments manifold, been used for around 2k miles and no cracks or repairs etc :nod: comes with used turbo locking tabs and locking nuts very good...
  10. Jaydej

    Hybrid turbo

    Hey all, I've been looking for turbo options and have been told maybe a hybrid turbo would be a good idea, I'm looking for really quick spool abit more power and standard position. has anyone done this? Price, specs or other options please
  11. JDM_virgin

    Getting the mrs into a spec s

    Right so last night the girlfriend caught me completely off guard when she said she wants a car like mine so I suggested a spec S as they're cheaper and her insurance would be way less and to my amazement she agreed! So my question is what sort of prices can you pick up a spec S for at the...
  12. jake

    Rb25 swap

    So I'm looking at doing an rb25 swap on my s15 Just wondering on the best way to go about it like how to get all the bits how much I should be looking to spend and how much Time I should be look to spend doing it I was thinking the best way to go about it would be to go and get a r33 that had...
  13. NICKO

    FS: HKS GTRS Turbo near new pics inside

    here is my HKS GTRS turbo I bought from RHD Japan a while back and its been on my S15 thats been garaged for the past few years, its covered around 2k miles and is in near new condition. It made 375bhp at 1.4bar on my S15 which at the time was suffering from a misfire would rather this be...
  14. S15Cro

    Non-vvt S15

    So I have a 99 Silvia S15 N/A and I decided to go turbo. A friend of mine has a 1997 180sx which he dropped a forged engine into so I took the oppertunity to buy his very low mileage Sr20det (non-vvt) blacktop engine. My question is can I simply buy a complete S14/S15 exhaust side (waterneck...
  15. Jay-pan

    FS: Genuine Nissan Gasket

    Turbo to manifold gasket, bought thinking it would fit my car not realising stupidly that a GT30 turbo is a lot bigger than standard. still in package but opened to check. Genuine nissan part with item code £10 posted 1st class no offers.
  16. C

    FS: S15 spec R **huge spec**mega clean**355whp**

    Decided it's time i move on from my 15, iv started loosing interest in it and with me working all the time I just don't have time for It anymore. I am more than happy to sell this Abroad, iv done it befor and know what I'm doing. I'm also not stupid and will spot a scam a mile off. Don't...
  17. japgarage

    My RB30 S15

    So its time I do a proper post for my car, been meaning to..... but just been to lazy. I bought her 3 years back in England, took it home to Ireland. Since then we have had our ups and downs. When I bought this it was a good platform for what I wanted to achieve but it needed a lot of TLC &...
  18. T

    Turbo setup...Metal lock nuts or use Lock Tabs

    Need some feedback here guys as my turbo is coming out for all new gaskets and braided lines at the weekend.should i just get some OEM Lock tabs or are those driftworks metal lock nuts a better idea the only mods done to engine will be elbow and downpipe so more or less standard set up.Im...
  19. S

    FS: Garrett GT3082R

    Genuine Garrett GT3082R 0.82a/r for sale, aka GT3040R £500 no offers part number is 700177-5014 Turbo has done around 3000 miles, not used in anger as it was on a stock bottom end by previous owner. Dual Ball Bearing "GT30/GT40R" Turbo assembly. T3 style inlet flange with 4 bolt T31 style...
Top