What's new

valve

  1. J

    rebuild

    unfortunately my sr20det has burnt some plugs causing scoring to the bores..(I think this is due to bad mapping) I'm currently in the process of removing the engine and thinking on doing a forge rebuild. has anyone got any suggestions in any area before I start the build and also what are the...
  2. JDM_virgin

    FS: Apex stainless steel intake

    bling up your engine bay with some stainless goodness. Brand new comes with the silicon connections and I will throw in four jubilee clips with the sale. Had this for ages just never got around to fit it and now I've deleted my dump valve its easier for me to block the rubber pipe than a...
  3. NICKO

    FS: Loads of S15/14 parts for sale Greddy Blitz Forge ECU etc

    S15 Silvia ECU With Horsham Developments Stage 3A custom Mapped Board £250 Genuine Forge Blow Off Valve, Comes with tuning kit for various boost levels, in new condition with very little use £100 posted Blitz Blow Off Valve, now with the black hose and clamps in the picture £80...
  4. K

    FS: Z32, HKS boost controller , strut brace, fuel pump, 555cc injectors and more!

    I'm not 100% sure on prices so do correct me if I'm way out! 4. Brand new Rear Strut brace and used front chassis brace powder coated white £70 delivered. 5.A Electronic butterfly valve kit on a flange that fits inbetween 2 exhaust flanges to be able to silence the car whist driving £70...
  5. Jay-pan

    FS: spacers,engine parts,spoiler,lights,TIAL...ect!

    All parts are stated collected or posted if you want a price on postage then PM and will find out but ideally collected. Offers accepted as well. Collection from Telford, Shropshire. ------------------------------------------------------ Doubled electric fans with custom wires fitted (...
  6. S

    FS: brand whore

    Right got a few items for sale. Apexi 3" manual exhaust control valve. Brand new never used. £100 Greddy top mount mani slight cracking on collector can be fixed. Was part of td06 20g kit £100 Defi boost and temp gauges 52mm Black and amber. Still currently fitted to be removed. Probably a...
  7. laimis

    FS: For sale BC camshaft,valve spirng,retainers

    Used BC SR20DET camshaft IN/EX 264' lift 12.06mm.,single valve spring,titanium retainers 300GBP.
  8. O

    Put Blitz SBC i-Color?

    Hallo everyone! I have just bought a Blitz SBC i-Color. The problem what I can find is 2 things. 1. Where is a good place too put the display? 2. Where in the engine bay is a good place too put the valve unit?
    • oneamous
    • Thread
    • Replies: 1
    • Forum: S15 Chat
  9. waggoner

    rough running

    Hey guys i picked up my s15 about 3 weeks ago. It was running good for a week then stalled when i came to a complete stop. Next drive it did it twice. And just keeps getting worse. It now cant keep a constant idle after i move it and jerks while driving. i cleaned out the acc valve after reading...
  10. S15AK

    Valves - SR20DET

    Hi Guys, I'm getting valve bounce, so need to change the valve springs and retainers. I need some help in sources some, and not sure if you can get uprated ones? Also as the head it off I might as well look at a cams, but not sure if its worth it as I am happy with the power it has now...
  11. crazymat666

    dump valve noise and chatter :S

    so late last year i changed over all my clips on my boost pipes to slurry clips and it has made a dramatic change to how it drives. on idle it isnt as lumpy anymore and just seems smoother while driving.but i have noticed the dump valve dumps and it also chatters when changing gear or letting...
  12. fez06

    forge recirc valve

    Are they any good as an upgrade? Been offered one for £65 done about 4k miles
  13. shib

    Idle Valve

    Gents Does anyone know the size or part number for the pipe between the idle valve and the inter cooler pipe? I'm also after the part number for the bracket on the passenger side door which the door handle on the door card bolts on to. The bracket is held on with 2 screws and looks like this...
  14. Damos15

    Standard Valve Spring Specs

    Hi Guys, Does anyone know the standard valve spring specs? Also what would you recommend as an easy upgrade, considering im still running standard cams. For now. Just getting an engine refresh. Thanks
  15. Parky

    Causes for hunting at idle...?

    Took the s15 out for a drive this morning and after a couple of minutes came to a stop, and the revs were hunting up up and down between 1k and 2k. Turned the engine off and back on then it was fine. What could cause this and anyone have any recommendations / ideas? Idle control valve...
  16. crazymat666

    is there such place that make custom made silicone hoses??

    i have a dump valve fitted but the t-piece spout is 25mm which is standard size for all bore size t-pieces .but the dump valve is also 25mm and has split the t-piece even though i got around it it looks scruffy and the fact ino its like it bugs me.so does anyone know of any places on the...
  17. C

    FS: Forge recirculating dump valve - Piping only

    Samco 90 deg reducing elbow and length of clear pipe for use with forge recirculating dump valve. In a good 'used' condition. £20 delivered
  18. C

    FS: S15 dump valve with internal modification

    I have my original dump valve here. It has an internal modification - the small hole which causes boost leaks at higher boost levels has been blocked off. This all means you can run more boost on the stick valve/pipe work. £20 delivered
  19. Luke

    My baby

    And this is a picture i took of it a couple of days ago when i got my new lights :D hay guys and girls this is my baby that ive owned for year and a half now and love it to bits and think it looks almost perfect, these are some of the pics of it when i was having it imported by torque GT and...
  20. S

    FS: Tomei Type A Valve Springs & Cylinder Head

    I have for sale a set of brand new unused tomei type a valve springs still in the box. £150 delivered Also got a bare cylinder head, no valves as they were bent but the rest of the head is fine. Not sure how much this is worth so ill try £75 delivered? If you want pictures pm me and I can get...
17,094Threads
161,001Messages
11,796Members
barxaslorLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
410
Total visitors
410
Totals may include hidden visitors.
Top