What's new

R33 GTS Rear suspension components

1

130r

Guest
Anybody have any idea what parts froma R33 GTS rear suspension is interchanable between S15.

- rear subframe.
- suspension arms (traction, toe and camber)
- lower arm.

am buying a rear set which include the twin pot brake. Wanted to know what to keep. Thanks
 
Joined
24 February 2006
Messages
452
Reaction score
0
Points
0
Location
Plymouth
Dont think the rear subframe will fit :no:

But the aftermarket suspension arms seem to be all the same for the 14, 15 and GTS R33... so it must be a close match... If you have them all off why not upgrade for some Driftworks arm sets?! :)
 
M

Matt_S

Guest
Subframe wont fit (its the same as an S14 item).
Rear uppers, Rear traction and rear lower arms are all the same tho. :)
(R33s dont use toe arms due to them haveing HICAS)
The hub uprights are also the same, but you would need to pop the HICAS balljoints out and fit a toe arm bush in their place :)

If youre upgrading the brakes, just split the S15 hubs and use what you need off the R33. You never know whats gone on with the dodnor parts. If yours arent broke (bent arms/bearings knackered) then put YOUR parts back on the car. Also, dont forget you need the R33 handbrake cables ;) (Im assumign you know you have to fit the R33 drum handbrake setup aswell :wack: )
 
Last edited:
1

130r

Guest
Thanks guys for your infor.
Will be following Nicely brake swap write up for this.
Just want to know what can be savage and what not to keep.

Thanks again.
 
Top