S15 jdm oem boost gauge wires

[specR_s15]

Need some help wiring my S15 jdm oem boost gauge to the a-pillar wires, can someone show me which colour wires match up (a-pillar --> boost gauge)?
I removed the white clip off the apillar a while back when i changed the boost gauge and now I decided to put oem back on.

Wires from the boost gauge:
-Red w/ pink dot
-Red
-Black
-Yellow
-White
-White

cheers

 

[adz87kc]

http://forum.s15oc.com/showthread.php?5339-Boost-Gauge-Wiring-PLEASE-HELP!

 

[specR_s15]

I had a look at that thread but it only states the wires from the apillar. I can't figure out which wires on the boost gauge are power, boost sensor, ground, illumination etc. Can someone with a JDM s15 please check what colour wires match up, from a pillar to boost gauge. From the white clip. cheers

 

[spoonman]

Holding the boost gauge so you are looking at the dial face, the correct way up.
Wires going clock wise, so there should be 4 going down the left side of the plug and 2 on going down the right side of the plug.
Starting from the one on the left at the bottom and finishing with the one on the bottom at the right. Got it?

Boost gauge: - Pillar Wires
Red / pink dot - Green / Yellow stripe (Bottom left)
Red / pink dot - Red / Black stripe
Yellow - White / Green Stripe
Black - Black (Top left)
White / Pink dot - Black (Top Right)
White / Pink dot - Red / Blue Stripe ( Bottom Right)