Recent content by koullis

  1. koullis

    cas problem????

    Hi, yesterday i was cruising along the beach and when i found an empty space i floored it. i hit the rev limiter and since then my car runs only with the two middle cylinders. i say that because when i removed no1 and no4 coil it made no difference, when i removed 3 and then 4 the car was trying...
  2. koullis

    300zx brake servo.

    Hi guys, i have D2 8 piston front brakes (same as ksport) with 330mm discs and standard rears. Brake pedal almost go all the way down. I am thinking of installing a BMC from a 300zx. BM57, 1 1/16. Car was a spec-s so the BMC might be smaller than a spec-r. What are the advantages of fitting the...
  3. koullis

    rear traction problem

    Hi guys. I have a problem with my Silvia. Car is around 400bhp. I am experiencing rear traction problems. When i am off boost at around 3000rpm and go full throttle and the car starts raising boost at 4000rpm where i am full boost 1.5bar the car looses rear tyre grip. I have a Tein Flex...
  4. koullis

    S14 tie rods and ends to s15

    Hi, does anyone knows if the S14 tie rods and ends or just the ends fit the S15? Do i have to buy both the tie rods and ends or is it ok to buy just the S14 tie rod ends? Thank you.
  5. koullis

    S15 Project almost finished

    Hi, i got my car 2 years ago. It was a standard Spec S. Since then the following mods where done to the car: Engine Je pistons Eagle rods with ARP 2000 studs ACL Race Crank, Rod, Thrust Bearings ARP Head and Main studs Cometic Head Gasket Brian Crower springs, retainers and 264/264 cams Greddy...
  6. koullis

    S15 TPS wiring

    Hey guys, anyone got the wiring for the TPS? If you can include wire colors it will be great. Thanks.
  7. koullis

    FS: SARD 850cc injectors for sale and Circuit Sports Rail

    I have a set of 850cc SARD injectors and a Circuit Sports Rai with 500miles on them. Reason for sale is that my new plenum works with top feed injectors. Injectors £270 posted Fuel rail £170 posted
  8. koullis

    s13 lsd into s15

    hi, i recently purchased an s13 tomei 2 way lsd with side flanges to fit to my jds s15 silvia with hellical lsd. today my mechanic tried ti install it on my car and told me that it did not fit. first problem was the bolt size of the ring but took care of that and the other had something to do...
  9. koullis

    S15 sr20de to coil

    Hi, how can i convert my sr20de S15 to coil? currently running a distributor. What parts will i need? thinking of using splitfire coils for s15, what else?
  10. koullis

    lsd that fits into s15 pumpkin.

    hi, i am searching for a used lsd for my s15 but i do not seem to find anythink. i find a lot from s13 and s14. can i use this lsd on my s15? will i need the shafts?
  11. koullis

    S13, s14 1.5 0r 2 way lsd into s15 with hellical

    hi guys, i found a lot of used r200 lsd from s13 and s14. can i fit them to my s15 with hellical lsd? will i need shafts or something else to do the conversion?
  12. koullis

    evo 8 recaros in s15

    hi, i bought a set of recaro seats from an evo 8. i made some modifications to the rails and fitted them to my s15. the problem i have is head and leg to steering wheel clearance. i am about 1.73m and i almost hit the roof. also my left leg hits the steering wheel every time i shift. (steering...
  13. koullis

    td06s l2 20g

    hi, i have this turbo on my s15 with an aftermarket manifold. turbo uses standard t25/5bolt flanges. i am increasing my boost from 1.1 bar to 1.5 bar and i want to use an external gate. i saw some external adapter plates but do not come in t2/t2 only t2/t3. the other thought was remove the...
  14. koullis

    WTB: r34 gtt spoiler

    wanted r34 gtt spoiler and shipping to cyprus.
  15. koullis

    s15 sr20de clutch

    hi guys, i would like to know if i can put an sr20det clutch kit including flywheel to my s15 sr20de. do i need to make any modifications? the sr20de gearbox is 5 speed. i think my cluth disc is 225mm and the tubo is 240mm if this helps. maybe an s14 sr20det will fit? i tried to find an sr20de...
Top