1. I

    Tomei solid lifter : still noisy ?

    Hi, I installed some tomei solid lifters on my SR20, which has tomei procams 260° The rockers have been machined as required I check valve tolerances, made a reshim, and the head is still noisy I use 300V, 15W50, when the oil is cold, the engine is somehow quiet, but after the oil has...
  2. W

    FS: Apexi avcr black edition

    As above few minor scratches nothing bad as you can see from the pictures, loom looks to have been extended at some point, works perfectly and held rock solid boost £250 delivered
  3. V

    Turbo coolant leak

    Hi, There had been a minor coolant leak from the car and after looking to find it we realised it was one of the solid coolant lines feeding the turbo (the ones that run under the manifold heat shield). I know it'll be a hassle to replace it with another stock pipe so I'm looking at braided ones...
  4. Jay-pan

    Solid engine mounts.

    Hi guys, I got solid engine mounts fitted to my car and want to get rid for some standard rubber ones where's best too get all three mounts from? and if anyone is interested in solid engine mounts make me an offer
  5. N

    My new 2002 Silvia build

    Hi here's a few pictures of the car and wheel build. I started with buying this specR silvia not a solid shell but was complete Which I then made look like this... I decided to build a wide arch silvia so wanted a mint solid shell so I imported a new mint pearl white silvia It's a 2002 rare...
  6. dave_t

    FS: Circuit Sports Solid Shifter Collar Bushing S13/14/15 5-Speed Transmission

    Item For Sale: Circuit Sports Solid Shifter Collar Bushing for all S13/14/15 5-Speed Transmission. Replace your worn out oem nylon collar to vastly reduce the slack in your shifter. Bought inadvertently for my 6-Speed, only realised when it arrived in the post that it is not compatable. So i...
  7. A

    WTB: WANTED : s15 solid flywheel

    thought id stick this up on the off chance somone has one lying about :P I need a s15 solid flywheel for a 6speed box, not a duel mass one and other SR solid flywheels dont work,
  8. P

    Can I repair a damaged front mount inter cooler?

    Greetings everyone, I was driving around a area with a friend of mine and I went a little over the speed limit and something hit my front mount intercooler. I went home to check and the intercooler had a dint of the size of a average adult hand clenched. It could be possibly a rock that has hit...
  9. J

    £49.00!! Solid Alloy Subframe Bushes!

    Hey guys, Here we have back in stock our Nissan Solid Alloy Subframe Bushes Solid Subframe bushes are a must have for all hard driving enthusiasts, these one piece CNC machined aluminium rear suspension bushes will banish those soggy back end blues experienced under extreme driving...
  10. S15AK

    Solid front diff mounts?

    Hi Guys, Got the S15 in for a service and we have noticed my front polly diff mount is shot, so needs replacing. I was struggling to source another polly one, so in the end I've order a solid one from driftworks. So I know I am moving to a solid mount either way, but just wanted some...
  11. C

    Bushes - solid v poly

    I can't decide what setup to go for with the diff/subframe bushes. Was originally planning to go solid in the diff and subframe but had a re-think and decided to go for solid diff and poly subframe, but still not 100% sure :rolleyes: What combinations are you guys running and what do you think...
  12. M

    Clutch / Flywheel

    Hey hows it going . I changed the dual mass flywheel to a solid one and the new clutch i got has a soid center.but ineed it to be sprung as the fly is solid. can i just fit an s14 clutch kit as it has a sprung center. will it fit and what are the differences if any Thanks
  13. S

    WTB: Consult II

    Does anyone know where I can get a hold of this gadget? I can't find solid information about it on the net. Seems precious.