crank
-
I
WTB: Crank Pulley wanted SR20DE or SR20DET
Wanted good condition CRANK PULLEY from SR20 S14 or S15 DE or DET are the same. PM me Cheers Immy- immy21
- Thread
- Replies: 1
- Forum: Car Parts for Sale (Silvia)
-
D
WTB: SR20DET Crank Pulley?
Has anybody got a crank pulley they want to get rid of that isn't damaged? Ive chipped mine getting it off, plus its looking rather rough!- David Bloomfield
- Thread
- Replies: 7
- Forum: Car Parts for Sale (Silvia)
-
FS: S15 bits
So as of next weekend my s15 will be starting it's rb25 swap so got some bits up for sale Sr20 det with blue rocker cover was just rebuilt in November with genuine nissan gasket kit have a recondition crank and crank pulley put in as well as acl race bearings pulls good and doesn't us a lot...- jake
- Thread
- Replies: 12
- Forum: Car Parts for Sale (Silvia)
-
WTB: S15 or s14a crank shaft and crank shaft pulley
I need of a crank shaft and a crank shaft pulley ASAP to finish of my engine re build on my s15 as I found a crack in my pulley and the key in Sid the pulley has moved and dug out a grove in the crank shaft on the Join thanx Sent from my iPhone using Tapatalk- jake
- Thread
- Replies: 1
- Forum: Car Parts for Sale (Silvia)
-
J
FS: SR20DET Breaking
I have an engine that has been damaged due to DET all parts other than the pistons Block And cylinder head are fine. Crankshaft in std size good condition, no damage at all. £100 Rods £10 each no damage Rocker arms £8 each inlet and exhaust valves are yet to be removed from head but i...- jj205mi
- Thread
- Replies: 0
- Forum: Car Parts for Sale (Silvia)
-
E
Complete spark and fuel cut for no apparent reason
Hi guys, I was driving my S15 Spec R gently down the road today and suddenly lost all power, and now it won't start. I've checked all the usual stuff and found nothing untoward but I can explain why it won't run - there's no spark* and no fuel injection**. * There's 12V getting to the coils...- empty_inside
- Thread
- Replies: 2
- Forum: Electrical & Audio
-
WTB: Crank Angle Sensor S14 / S15
Crank Angle Sensor S14 / S15- spoonman
- Thread
- Replies: 3
- Forum: Car Parts for Sale (Silvia)
-
SR20DET - Crank angle sensor?
The story So the other week I was driving to QLD drift matsuri which is about a 5 hour drive from where I live. Almost half way there in the middle of nowhere my car spluttered and then it got more frequent and eventually stalled and wouldn't start again. I didn't have many tools on me but I was...- darcyjohan
- Thread
- Replies: 2
- Forum: Mechanical & Bodywork
-
Crank Pulley slight damage, will this affect the balance?
The car started to leak from the front crank seal, so it got replaced as you do, but in the process my helpfull brother who "has done the heaps of times before", said he would remove the crank pulley so i let him. In the process with his cheap and nasty puller he managed to snap of several tabs...- spoonman
- Thread
- Replies: 4
- Forum: Mechanical & Bodywork
-
Crank Sensor - Anyone got access to the Service manual
Anyone got access to the S15 Service Manual at the moment (I cant access from work...) Need to know if there is a Crank sensor, as well as the CAS? Cheers Topp :)- Topper
- Thread
- Replies: 8
- Forum: Mechanical & Bodywork
-
FS: Ready to build Huge spec SR20 bottom end
This is a bottom end only, however I can supply a stripped head if needed. It was intended to be a high compression bottom end to run alot of power. Everything has been done and paid for, all the parts are there to start building it, it just needs assembling. I've spent about 5 hours of my...- Adam L
- Thread
- Replies: 11
- Forum: Car Parts for Sale (Silvia)
-
crank shaft wear
Hi Guys, wonder if anyone heard of crankshaft wear that requires machining. My ride had some noise and we suspected it as bearings wear. We had it changed but still the noise is there. Then we think its got to do with the crank shaft wear. My mileage is about 145,000 km. Any ideas or similar...- sjt47y
- Thread
- Replies: 0
- Forum: Mechanical & Bodywork
-
FS: S14 sr20det engine parts and block
hi there i am pawning off all parts from my s14 sr20 collection i,e sr head with wear but whole with non rattle vvt. sr bottom end with 1mm overbore again with wear on cylinders crank unknown but can be checked. (crank sold) Forged pistons (sold) New timing chain was fitted before the engine...- roachey
- Thread
- Replies: 2
- Forum: Car Parts for Sale (Silvia)
-
Crank Pulley Bolt Size?
Before I go out and buy a complete set of large sockets (i only have up to 24mm), does anyone know off hand what size is the crank pulley bolt?- naha_music
- Thread
- Replies: 1
- Forum: S15 Chat
-
H
420hp, what engine mods needed?
Hey mates, I was about to sell my S15... but kinda love the darn thing, so I`m keeping it :D Want to do some mods on it tho.. widebody kit, en some engine mods. Would like to take it to about 420ish hp (crank). So any advice on what to modify on the engine to get this kind of HP figures? My...- Hank S15
- Thread
- Replies: 15
- Forum: Mechanical & Bodywork