What's new

manifold

  1. NICKO

    WTB: battery earth lead

    Im looking for a replacement battery earth lead that goes from battery to the arch then to the intake manifold :nod:
  2. L

    blowing exhaust...turbo/manifold area.

    Well finally got the time to have a look at my blowing exhaust as the job has been pushed to the bottom of the list again, I started stripping it down today so I could get a better look and it looks as though its blowing from the manifold to cylinder head gasket so my first question is...is...
  3. N

    Whistle on Boost?

    Hi guys, I was wondering if someone could point in the right direction... Mods: Full exhaust system, manifold/elbow/downpipe/decat/catback Basically as im coming onto boost you can hear what i can only describe as a dentists drill? As i get into 3rd, 4th and 5th it either stops or engine...
  4. V

    Exhaust system, will manifold restrict?

    Hi guys, My car has got an Apexi exhaust straight through from the manifold, but the manifold is still standard. Will it be causing any restrictions? Ta! Tom
  5. dave_t

    WTB: SR20DET Manifold Stud x1

    Im after a manifold stud for my SR20DET, ideally brand new. http://www.frsport.com/Nissan-08267-03010-Genuine-OEM-Head-to-Exhaust-Manifold-Stud-KA24DE-SR20DET_p_8076.html Anyone got one that they can post out sharpish? please pm me for quickest response
  6. S

    FS: Cometic MLS HG and MLS Exhaust manifold gasket

    selling a couple of parts from my rebuild that I don't need any more: 1) Cometic MLS HG in 87.5mm bore 0.045" thickness (1.15mm). this one here...
  7. Jaydej

    First mods advice

    Hey everyone, I been looking at mods and I'm not sure what is the best starter mods, I'm torn between intercooler and intake or full exhaust and manifold. what are your opinions? Or is there different mods I should start with?
  8. driftmonkey

    FS: SS MANIFOLD SR20 det

    brought this from japan before i imported my S15 but no longer needed ive enough power... the welds are soooo nice no cracks and looks like it wasn't used for long £85 posted and buyer pays Paypal fees.. or collection from Southampton for £75... pm me and NO silly offers :D
  9. FaberNZ.blaaack-S15

    new manifold installation

    Hey guys i've just bought a new intake mani by that i mean it bolts onto the runners not the full manifold that bolts to the head. And i was just wondering if theres anything i need to know when installing it. precautions etc. will i need to change the gasket there because i don't have another one.
  10. NICKO

    FS: hks gtrs turbo and horsham developments manifold hks elbow

    Testing the water to see if anyone would be interested in this setup. includes a Horsham developments manifold, hks gtrs turbo, hks elbow, apex turbo lines All above parts were bought new and have covered around 2k and are still like new Good for a low lag 400bhp setup Cheers, nicko
  11. Parky

    FS: Stainless manifold and 3" japspeed downpipe

    Toyosports stainless manifold for SR20DET, bought 2nd hand and never fitted to my car, no cracks or damage, want what I paid for it which is £65 posted. 3" Japspeed down pipe with flexi section, bought new last week, fitted for only a few days so in practically as new condition, £95 posted...
  12. Parky

    Changing exhaust manifold - any tricks / tips?

    I'm planning on changing the stock exhaust manifold for a stainless jobby this week, just waiting on the gaskets to arrive. Ideally I want to do this without having to remove the turbo but know that getting to the 4 mani > turbo nuts is going to be a pain in the tits. I managed to change the...
  13. CMR

    FS: T28R with Braided Lines, Tomei Expreme Elbow, Manifold, Decat etc

    Few items for sale: S15 T28R Ball Bearing Turbo, S15 Manifold and Braided Lines Removed from my S15, Turbo has done 60k, excellent condition, no smoke and very minimal play as to be expected with a ball bearing turbo. Comes with Hose Solutions braided lines that have are nearly new. It is...
  14. S

    WTB: SR20DET Top Mount Manifold

    Looking for an SR20DET top mount manifold for a T3 turbo. Not looking to spend a lot. Just need something to put in for the time being. Prefer cast iron, but if you have a stainless, I may still be interested. No cracks or damage please.
  15. M

    Turbo to manifold gasket recommendations?

    As title. Can anyone recommend a good quality t28 turbo to manifold gasket or is it just best to stay with oem gaskets? Cheers Sam
  16. Nissan_S15

    Nissan Silvia S15 Spec S Engine Bay Cleanup ;)

    Decided to save up some money this summer and clean up the engine bay on my S15. So I went ahead and purchased a new Fujitsubo manifold for a bit of extra power and also had the Cam Cover sprayed mint green. The manifold work was all done by Horsham Developments followed by a Dyno run with the...
  17. Nissan_S15

    Look at what just arrived from Japan ;)

    Been wanting to get hold of this particular exhaust header for a long time, but couldnt get hold of one anywhere local, so decided to order from Japan. Its a Fujitsubo header designed for the S15 spec S SR20DE engines and apparently comes highly recommended. It is also the same header used in...
  18. S

    Any decent welders out there?

    Well, my exhaust manifold has a pretty extreme crack that needs repair. Pretty much the bit that holds the external wastegate has nearly broken off. Anyone able to weld a stainless steel manifold? I'll post up some pics when I get home. It's pretty bad.....:cry:
  19. Nissan_S15

    SR20DE Uprated Header/manifold - Where to buy?

    Hey guys, Would somone here be able to point me in the right direction of an uprated header/manifold for my S15 Spec S SR20DE engine? Any links would be appreciated ;) Regards Ash
  20. S

    FS: S15 t28r bb turbo, 35k miles

    Got the t28r off my s15 for sale after up grading to a 2871. Good condition, done 35k miles. its currently on a decent aftermarket manifold that's cracked. If you want the manifold and can collect I'll throw it in for free, it will need welding though and I haven't got the time to do it at...
17,094Threads
161,001Messages
11,800Members
SR_POWAHLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
610
Total visitors
610
Totals may include hidden visitors.
Top