What's new

Albert's Nissan Silvia S15 *now with sr20det*

S

S15_silvia_

Guest
WOW..its coming along nicely m8....good luck with the rest of the build..


u got some nice parts there...should produce some nice power/torque figures... :nod:


:thumbs: :cool: ;) :) :notworthy:
 
Joined
27 April 2006
Messages
1,145
Reaction score
0
Points
0
Location
Ireland
this thread just gets better and better :D

a for the greddy intake mani it seems like a vast improvement over stock, ive been doing a bit of research on them and have one one the way from japland with a larger throttlebody.......pity ill be waiting a few months before i can fit it :cry:
 
A

Albert

Guest
slammedmind said:
this thread just gets better and better :D

a for the greddy intake mani it seems like a vast improvement over stock, ive been doing a bit of research on them and have one one the way from japland with a larger throttlebody.......pity ill be waiting a few months before i can fit it :cry:
I have the engine sr20det black top from 180sx rps13 and it has the larger throttle (60mm). So I think Intake Manifold is good for high RPM (>5-6k). But Greddy Intake Manifold I like not, better JUN. But it cos VERY MUCH. Maybe copy of JUN? (KU Engineering, saw it on ebay)
 
Joined
27 April 2006
Messages
1,145
Reaction score
0
Points
0
Location
Ireland
if its the one on ebay its just a copy and i wouldnt go near it! Dont trust those ebay parts at all unless its genuine. The intake mani has a bigger volume and along with the larger throttle body shoud increase the tourque quiet a bit. What engine management are you using?
 
Joined
27 April 2006
Messages
1,145
Reaction score
0
Points
0
Location
Ireland
that one actually looks very good! the one i was looking at is made in the states and didnt look half as good. The runners all look like theyl improve flow big time, maybe ill send the greddy back! :nod:
 
A

Albert

Guest
Will ask tommorow, maybe will make someone like KU Engineering Intak Manifold here in Moscow :D
 
A

Albert

Guest
Coilovers HKS HYPER MAX2



and Trust Oil Cooler
 
A

Albert

Guest
This my full spec list:

engine:
- sr20det black top from 180sx rps13
- JE pistons 86.5mm
- Brian Crower S13 SR20DET Camshafts 264/264
- Brian Crower SR20DET Valve Spring + Retainer Kit
- Greddy Metal Head Gasket SR20DET 1.2mm
- Greddy SR20DET Oil Pan
- Eagle Rods SR20
- OEM bearings Crank/Rods
- S13 SR20DET Engine Gasket Kit
- ARP headstud kit sr20det
- Megan Racing pulley
- PE belts 3pc kit for S13 with AC
- Tomei Rocker Arm Stoppers
- Circuit Sports S13 sr20det Turbo Lines (Bottom mount)
- GT Oil Drain Kit
- Cusco Oil catch tank
- Trust Oil Cooler Kit
- Garrett GTRS Style (400hp)

intake/exhaust:
- FMIC HKS Type-S
- BOV HKS SSQV
- Apexi Power Intake + afm z32
- Silk Road Manifold
- Blitz Outlet + Downpipe 3" (completed by Wintech)
- Catbak Kakimoto Racing

fuel:
- Apexi Fuel Pump SKYLINE GT-R 32 404-A011
- Injectors 850cc
- Fuel Pressure Regulator

tranmission:
- 5speed transmission from 180sx rps13
- Nismo Engine/Tranny
- Silk Road Engine Torque Dampener
- HKS Twin Plate Clutch
- NISMO Slave cylinder
- NISMO Pivot
- LSD Cusco 2Way
- Cusco Strut Tower Bar (front and rear)
- Cusco 6 point Roll bar

brackes:
- Nissan Skyline R32 Brackes with OMP pads

suspension:
- Coilovers HKS HYPER MAX2
- Battle Version Rear Upper Control Arm
- Tein Adjustable Hard Tie Rods + Tierod Dust Boot
- Tanabe Sustec Sway Bars (Drift Spec)

electronic:
- Apexi Power FC
- Apexi AVC-r
- Defi gauges: boost, t. water, t. oil, oil press, EGT

exterior:
- Bodykit VeilSide EC-I Model (completed by SV-Tuning)
- C-West Bonnet
- Besiege Tail Lights
- Enkei 17" rims
 

Nicely

Moving on...
Founder of S15OC
Joined
26 October 2005
Messages
8,000
Reaction score
2
Points
38
Location
Helsinki, Finland
Website
www.jull.net
Country
With all of this new-found wealth, you could probably afford to refund me the cost of those Wisesquare tail lights, couldn't you? :indiff:
 
A

Albert

Guest
Nicely said:
With all of this new-found wealth, you could probably afford to refund me the cost of those Wisesquare tail lights, couldn't you? :indiff:

pm ;)
 
A

Albert

Guest
So, the news fromSV-TUNING service:

front bumper :


my new front fenders:



if anybody want like this fenders, pm ;-)

rear bumper (after bad drifting last season :twisted: )



Ordered some parts until engine start rebore and body is painting:

Greddy Intake Manifold:


KOYO Aluminum Radiator


Nismo Radiator Cap 1.3bar


SAMCO SR20DET Upper & Lower Radiator Hose



New fuel main line 8mm, sard fuel rail kit, sard fuel pressure regulator :D
 
C

cloudandy

Guest
did you need the oil filter relocated?
 
K

kieran

Guest
lol those wings and bonnet look the same as mine......good choice lol
 

Topper

Flying Scotsman
Joined
14 November 2005
Messages
4,312
Reaction score
0
Points
0
Location
Scotland
Website
www.s15oc.com
Country
Wings dont look like they were very smooth and needed some work?
 

Topper

Flying Scotsman
Joined
14 November 2005
Messages
4,312
Reaction score
0
Points
0
Location
Scotland
Website
www.s15oc.com
Country
Your front fenders, they look like they needed some work to make them smooth, what make are they?
 
A

Albert

Guest
Your front fenders, they look like they needed some work to make them smooth, what make are they?

No it's just model. Then will be matrix and after that I will get FRP fenders =)
 
A

alexfalk

Guest
Well this car just keep getting better and better.:thumbs:

But can?t you people see that Albert obviesly is making his fortune from his Russian Chop Shop..:rotfl:
 
Top