Search results

  1. bzh kevin

    NISMO Gauge Cluster Install Video

    nice! For some reason I found the Nismo cluster more OEM looking than the OEM one . You need an engine that rev to 10 000RPM now!
  2. bzh kevin

    My daily pearl white

    A bit more done today . The good news is fault codes can be read, displayed on screen and cleared. The not so good news (but not that bad) is that I am getting a bit confused with how to translate the reply from the ECU when querying for fault codes. The communication with the ECU is done via...
  3. bzh kevin

    My daily pearl white

    I turns out the fault code list I was using was incomplete . I found a better one in the forum's technical section : S15 fault codes (looking there from the start would have been a good idea🤦‍♀️). Fault 85 is listed as 'VTC Solenoid Valve Circuit ' . I find it strange as there is really no...
  4. bzh kevin

    My daily pearl white

    I choose to limit what I can display to : - air flow meter voltage - battery voltage - coolant temp - injector duty (calculated from injection time and RPM) - lambda sensor voltage - oil pressure (not available from the ECU but can be taken from the oil pressure switch) - ignition timing...
  5. bzh kevin

    My daily pearl white

    I tested the code on the raspberry pi . I was a bit shocked it worked straight away with the touch screen . I am not used to my program working first try :ROFLMAO: . Next I need to make sure I can get a stable 5v power supply in the car with a little delay after the car is turned off to let the...
  6. bzh kevin

    My daily pearl white

    After printing another set of brackets the screen now fits . Things are getting there on the software side too . Most of the display/UI is working . It is only running on my laptop at the moment and read values on a simulated ECU that generate random values . The next step will be to run the...
  7. bzh kevin

    My daily pearl white

    Thanks ! I haven't seen the Car SOS episode . I will try to see if I can find it when I have 5 minutes . I did watch the MightyCarMods one . The Lotus dash is really cool . I just assumed it just came from the V6 exige but after doing a quick resaerch it looks like they don't come with a...
  8. bzh kevin

    My daily pearl white

    A bit more done today . I finished pulling all the remaining wires from under the carpet . The software side is giving me a bit of a hard time as I use an old game engine to handle the display and it is proving to be not as straight forward as I was expecting . After a couple of hours battling...
  9. bzh kevin

    My daily pearl white

    I did a bit of work on the design of the gauges . I want something easy to read and OEM looking(-ish) . Although I don't mind flashy gauges in race car like interior I am not a huge fan of them in a stock looking ones. After experimenting with various design I settled with this one : The...
  10. bzh kevin

    My daily pearl white

    I finally took the decision to get rid of the head unit that came with the car from Japan and replace it with something useful . I am terrible at looking at my gauges/dashboard when running on track so I decided to have a bit of fun and design a system that can display custom gauges and set...
  11. bzh kevin

    Hello!

    welcome!
  12. bzh kevin

    My daily pearl white

    I haven't posted anything to this thread in a long time . The car is still stock and running well . I booked a drift day in Santa pod earlier this week . Couldn't commit to the faster part of the track as I was a bit worried about damaging the car.
  13. bzh kevin

    s15 market value

    @Celicasaur Tell me about it! The first car I bought in the UK was an s14 zenki, I paid £1000 for it in 2008 then a year later I got rid of it and bought an s13 for £1600 . It is just crazy how much they are going for now . Not complaining too much about it though . It has probably paid for...
  14. bzh kevin

    Headlight Restore and Trunk Rattle Fix Video

    awesome! I will have a look at the sensor when I have a bit of time .
  15. bzh kevin

    Headlight Restore and Trunk Rattle Fix Video

    My boost gauge has a similar issue . The needle slowly goes all the way up then all the way back down when it decides to stop working and never works again unless I turn the car off and on again (usually the car needs to cool down for it to work again) . I tried changing the vacuum hose as well...
  16. bzh kevin

    s15 market value

    Thanks for the info @Joeh . Definitely not looking to sell . More making sure my insurance would pay enough to get another one if the car ended up being written off . I still daily it so better be safe than sorry . I was expecting the US to drive prices up as they did for Skylines but I wasn't...
  17. bzh kevin

    s15 market value

    Back in 2015 I was looking for a car that could do a bit of everything from daily commute to the odd track/drift day while still being reliable and cheap-ish to run . I ended up getting a clean stock S15 spec-R aero as it ticked all the boxes and I also wanted another Silvia since I got rid of...
  18. bzh kevin

    WTB: airbag control unit

    Hi, I am looking for an airbag control module (Part number : 2855685F26) and a set of rear calipers . Thanks
  19. bzh kevin

    My daily pearl white

    Hi everyone! I bought my s15 last august and haven't been very active on the forum so I think it's now time for me to introduce myself and the car properly . I am Kevin, 29 years old and French (nobody is perfect) . I have owned a couple of 200sx's in the past, an s13 and an s14 and really...
  20. bzh kevin

    hello!!

    Hi everyone, I am kevin . I have been a happy s15 owner for the past few weeks and I hope It will remain this way . Here is my car (sorry, it needs a good clean) : I will try to upload better pictures when I get a chance to take some . The car is standard apart from some fancy ICE...
Top