What's new

hose

  1. LuPix_S15

    Engine Hose Size Guide

    Ok peeps - finally got round to this lol! :wack: 1. Fuel hoses = 8mm 2. Defi boost gauge hoses = 4mm 3. Plenum intake pipe = 70mm 4. Cold pipe/plenum = 14mm 5. Recirc feed = 38mm 6. Breathers = 16mm 7. Boost solenoid vacuums = 6mm 8. Hotpipe = 50mm 9. Recirc/intake = 27mm 10. Rad hose =...
  2. S

    Full respray cost?

    Hey guys Recently I went to wash my car at a morrison's pressure washer due to the hose pipe ban. After getting half way through washing it I noticed my hands were covered in red anti-climb paint. I traced it back to the pressure washer nozzle and hose. Unfortunatly as I only noticed half way...
  3. Nickichi

    Water Sensor placement

    Hey guys Thought I might to plan out a weeks worth of upgrades for September to fit some of the kit im collecting in the shed atm Need some advice on locating the water temp sensor. Got a Defi version but im not sure were to install it. First place that I considered was on the outgoing (top)...
  4. Darren_S15

    Fitting Nismo 740cc Injectors

    Here is my guide on how to fit the Nismo 740cc injectors. Use this guide at your own risk, but it worked fine for me When you start your engine bay will look something like this Before I did anything I REMOVED THE BATTERY CABLES and covered the front bumper and wings of the car with some...
  5. Darren_S15

    Whats this then? (Throttle Body Hose)

    So on Sunday I managed to pull off the hose circled in red in the pic below: Some liquid came out of it and I immediatly put it back on as I thought it was a fuel line at first. But whatever it was had no smell and was just like water. Can anyone tell me what its for? Im guess it might be...
  6. S

    Intake+FMIC+exhaust = what do you guys use to tune it...

    :oWell i am planing on spending most of my hard worked for cash on suspension... So to save money i will pretty much buy every parts Japspeed makes for the S15: Intake with plate (i will look for some samco hose to finish the piping) Exhaust (cat back, with high flow cat, and i ll ask them to...
    • shibby
    • Thread
    • Replies: 2
    • Forum: S15 Chat
  7. Topper

    Which hose fits here.....

    ...I dont appear to have a hose left to connect to this: From/passes under the throttle body, any ideas: The outlet is at the base of the red strip See here for ideas so far: http://www.sxoc.com/vbb/showthread.php?t=436733
  8. Darren_S15

    BOV hose question

    Since Ive fitted a FMIC Ive been thinking of a way to get a decent hose setup with the standard BOV. My problem is the 32mm hose that comes from the charged side of the intake to the BOV itself. Ive been running pigeon for a while now with the intention of putting the BOV back, so I got myself...
  9. adz87kc

    universal or car specific bov

    Hey, i'm trying to get all the parts together that i need for my car coming. I'm going to buy an ssqv 3 bov but don't know whether to get a universal one or the car specific kit :confused: It'll be getting fitted to an apex type 1 intercooler set up. The universal bov is much cheaper but i'm...
  10. C

    FS: Turbo to Hotpipe - Blue Silicone Hose

    Pipes measure 51mm internal diameter, by 100mm long. It is a perfect fit, and exactly the same sizes as the original pipe. I wanted to change my original black turbo to hotpipe hose for a blue one to match all the other joints, but could only buy it in lengths of 76mm, which is too short...
  11. D

    blown hose - part suggestions please

    Hi Guys, Caught this blowout very early in the drive. Oil spewed all over the exhaust manifold. Can anybody tell me what this line's called and whats the best & longest lasting replacement option? Looks like I'll have to pull the turb off and redo all the gaskets at the same time. anything...
  12. C

    Vacuum hose..

    Does anybody know the sizes of the vacum hose used for the turbo actuator and recirc valve? I think their 4mm and 6mm internal diameters but havent got my car with me this week to check. Want to order some more hose for the weekend too! :) Cheers fellas :thumbs:
  13. S

    WTB: Boost Hose Bung

    Looking for the bungs for blocking of the hoses if any of you have a set or could point me in the right direction it would be a great help :cool:
  14. slammedmind

    FS: hose solutions braided clutch hose

    brand new braided clutch line from hose solutions 20 this is unused cheers Rob
  15. T

    Recirc hose diameter...

    What is the standard hose diameter for the recirc? I need to buy an adapter for my HKS SSQV and I've been told to look at the HKS 19mm and 29mm adapters but dont know which of the two I need to mate with my standard intake or is it another diameter not mentioned? If it makes a difference, I'm...
  16. DeanS15

    FS: revotec electronic variable fan controller

    for sale i have a brand new in the box revotec fan controller for the sr 32mm fitment, ideal for someone that wants to lose the viscous fan and cowl. the specs are below: Gives direct and rapid response to water temperature, Latest surface mount sensor with no mechanical parts to wear or...
  17. sushiming

    FS: Blow of Valve Re-circ pipe hose

    guys ive got some Recirc pipe hose ive got two lots of 1.8meter each which is long enough for u to re-circ the blow off valve back into ur standard system looking at £25 posted each but i can do it cheaper if someone wants to pic it up... heres a picture of it before it was cut. here hows it...
  18. C1TPT

    where from?

    Hi guys, my boost gauge isnt working so ive had a search on here and it sounds like its most likely going to be the hose to the solenoid. I had a look at it and it's deffinatley that!! lol i dont actually have one! I have had a look around the engine bay but cant see where the hose would come...
  19. Darren_S15

    Fitting Braided Brake Lines

    A while back I tried to fit some braided brake lines to the front of my car without success. Got the MOT next month so I need to get this sorted out now. I've got the braids that replace both the solid metal pipe and the rubber hose. Unfortunately I'm having problems with the little brass nut...
  20. D

    plumbing back BOV

    Hey all So, bought an s15 yesterday. Love it. Got pulled up at midnight last night - cops were real assholes about it, it has a Bov that vents to atmosphere... imagine that, a fine after owning it for 24 hours. Question - what's the cheapest hose I can use to plumb it back in? reckon some...
17,094Threads
161,001Messages
11,808Members
IptvptLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
2
Guests online
334
Total visitors
336
Totals may include hidden visitors.
Top