1. L

    FS: 6 speed box and comp clutch + lighten flywheel

    Got a mint 6 speed sr20 gearbox, been fully rebuilt with new bearings and fitted with nismo 6th gear, box has done about 2000 miles since rebuild, used genuine nissan oil since rebuild, reason is going cd009, comes with short shifter too( never had issues with it, don’t know make as came from...
  2. TheSnowfury

    WTB: Re-body Project: need S15 shell

    Hi folks, looking to completely rebuild my S15 following a recent accident. Anyone have an S15 shell up for grabs? Doesn’t matter if spec r or s as I’ll be seam welding it. Can cope with minor dents but must be straight. Once metal work done will be performing a bare metal respray in...
  3. W

    FS: Forged Nissan Silvia S15 Spec R 1999

    Can't post pics - Freshly Forged Nissan Silvia S15 Spec R 1999 | eBay Unfortunately it's time for me to sell one of my dream cars. The car is guaranteed to put a smile on anyone's face, and has been by far my favourite car to have the pleasure to own. The engine has only just had a forged...
  4. R

    FS: Nissan Silvia s15 2000 spec R - New Forged Engine Rebuild

    £15,000 - Nissan Silvia S15 2000 Spec R Induction: Apexi power intake Z32 MAF Apex stainless intake pipe Apex stainless hot pipe Apex type 1 FMIC Engine/Fuelling: Rebuild with Forged engine (300 miles) at Bells Auto Services Ropley Re bored and skimmed cylinders with oversized pistons CP...
  5. Lil SpecR

    Caliper rebuild kits?

    Where can I grab one from? Need one front ... :)
  6. J


    unfortunately my sr20det has burnt some plugs causing scoring to the bores..(I think this is due to bad mapping) I'm currently in the process of removing the engine and thinking on doing a forge rebuild. has anyone got any suggestions in any area before I start the build and also what are the...
  7. N

    FS: Black S15 in Germany

    I am selling my S15. KH3 - Black 01/1999 141.000KM The engine is freshly rebuild. Speclist: Genuine Oilpump, Waterpump, Piston Rings HKS GT RS Turbo(GTX rebuild) HKS Turbotimer Tomei Camshafts Tomei Headgasket ARP Bolds Rocker Arm Stopper Z32 AFM with Apexi Air Intake 740er Deatchwerks...
  8. N

    Hi from Germany

    Hi there, i am Mario from Germany. I am 25 years old and live near Baden-Baden. Many People knows the area as "Blackforest - Schwarzwald in German". Since December 2015 i have a S15 Spec R in KH3 Black. The Car is modfiied, the spec list is big. For example: Engine: HKS GT RS Turbo with...
  9. tooley

    FS: japan racing JR10 18x9.5 et 18 18 x 10.5 et 12

    Need to go even wider with the new kit sim getting for my s15. These are new. I've only put tyres on and driven the car to garage 21 when it was then stripped to a bare shell for rebuild. 2 x 18 x 9.5 et 18 2 x 18 x 10.5 et 12 Machined silver Advert is for wheels only no tyres. I...
  10. P

    rear caliper rebuild

    well guys, i need to rebuild my rear calipers as they are seizing on! can anyone point me in the right direction to get the cheapest kit?? thanks lads!
  11. Lanyard

    Rebuilding Tein Suspension - HELP needed

    As above I have a set of Tein StreetFlex coilovers that I want to get rebuilt to sell on as I'm now running DW CS2's. Does anyone know of a company in the UK that can supply all the parts or do the rework for me? Cheers guys:thumbs:
  12. K

    FS: Holset Hx30w turbo! super quick spool tubby

    As title! I'm selling my Holset hx30w 9cm exhaust housing twin scroll, vband fitment anti surge / ported compressor housing turbo. (It needs a rebuild) due to quite a bit of play in the shaft! There's no smoke even on boost and no damage to fins. But in my opinion it will need a rebuild. This...
  13. Max


    Gents, Does anyone know of a good condition DET used crankshaft, or any other alternative. New OEM or JDM. Any suggestions welcome really. I already have manley rods, but am going to need new pistons anyway. (Nightmare rebuild) It turns out the one that came out of my engine has too much...
  14. crazymat666

    got a new turbo coming.what to do with the old one?

    i have a new turbo arriving which should be today and its getting fitted monday but i dont know what to do with the old one? it has play in it and i think the bearings are going as there was noise when we span it .there anyway to sell it as i know some people or places can rebuild them?just...
  15. S15_SAM

    FS: Calliper rebuild kit x 1 DB power £12 posted.

    4 pot Nissan calliper rebuild kit, will do 1x S15/14 calliper. DB sell them for £16 posted. Any pics needed please ask but it's 4 piston seals, 4 dust covers and 4 retaining clips £12posted please cover fees if paying through PayPal or send by gift.
  16. B

    WTB: Front Brake Caliper

    In need of a Near side (passenger - UK) 4 Pot Spec R caliper. Mines seized :( before i get a rebuild kit, any body got one they dont want? regards.
  17. N

    WTB: SSR professor sp1 split bolts

    If anyone has a knackard wheel I could do with some spares to rebuild mine. I need the long and short bolts with chromed heads
  18. lvaleiron

    Problem with 3rd gear...

    I've been trying to find some information on the forum about this but so far no luck. I currently have a problem with my 6 speed box when engaging into third, basically i can engage third and there is no resistance but every time there is a crunchy noise, similar as if you try to engage on high...
  19. Fasthands

    Standard rear light, whats a fair price to pay for a set?

    As title says really.. I'm going to fit standard rear lights when I'v done my rebuild what's the going rate?
  20. Burnsy


    ..right need some advice please new to the world of nissan, i would like to know what rough figures the sr20det with stock internals can take safely. currently @ 325bhp 350lb ft understand that is the gearbox limit torque wise my gearbox is whining and i want it sorted, i know most go on for...