Crank Sensor - Anyone got access to the Service manual

[Topper]

Anyone got access to the S15 Service Manual at the moment (I cant access from work...)

Need to know if there is a Crank sensor, as well as the CAS?

Cheers
Topp

 

[DeanS15]

S14 sr20det had a crank sensor in the bell housing of the box that read off the back of the crank - s14a and s15 don't have it so I assume we don't have one, there are no sensors around the flywheel or harmonic balancer and the cam angle reading is directly related to crank angle so I don't think we have one mate...

 

[Topper]

Perfect, cheers mate :thumbs:

 

[martinbattye]

S14 sr20det had a crank sensor in the bell housing of the box that read off the back of the crank - s14a and s15 don't have it so I assume we don't have one, there are no sensors around the flywheel or harmonic balancer and the cam angle reading is directly related to crank angle so I don't think we have onemate...

no they dont..

all the variants of the turbo sr have and share the exact same sensor..

 

[martinbattye]

which i add is the normal sensor in the side of the head.

 

[DeanS15]

The cam angle sensor??? I came across the crank angle sensor in the bellhousing when researching gearbox conversions.... Apparently the s14 had this and it was deleted on subsequent models...

 

[martinbattye]

nope. Afraid not. the Nissan ECCS system relies solely upon the 360 opto cam angle sensor with widest slot for a home signal. There has never been a crank sensor on any sr. Even all the fwd ones and pulsar use distributor with the 360 wheel in. Please share where you learned this? Or is it hearsay

 

[DeanS15]

It's not hearsay, I came across it on various sites... I've searched again and dug a little deeper... Turns out the sites are all talking about ka24de when they mention the s14 my bad...

 

[martinbattye]

lol!!!