Re fitting Standard Steering Wheel

[N80Jamie]

Bought a standard Spec R steering wheel to replace the aftermarket one currently in place but having slight issues with the wiring for the horn and airbag. From the picture below, can anyone see if anything has been modded to suit the aftermarket wheel which will need replacing to get the standard one working again?

Top Wire is for the horn; bottom for the airbag.



One other slight issue, i reconnected the airbag to see if the blinking light would clear but it didn't. I have a feeling its the plug which is knackered.. Can i just get a replacement plug from Nissan?

Cheers!

 

[Alex De Large]

Looks like everything is there to me but it's been a few months since I had my steering wheel off.

You'll most likely need to reset the airbag light.

Here's the thread on what you need to do. http://forum.s15oc.com/threads/6454-HELP!!-Crazy-electrical-problem?highlight=airbag light

 

[N80Jamie]

Is the horn plugged in like the airbag? Noticed a plug in point on the steering wheel however i've got that black wire coming out as pictured above which prevents me from attempting to fit that. Ah great i'll give that a go cheers!

 

[paddyb01]

is the bit thet spins still on you steering column not to sure what it called looks like this

 

[N80Jamie]

Yes that's still intact with the 2 wires coming off (in the picture above).

 

[paddyb01]

should plug in than mate

 

[N80Jamie]

Do i need to remove the wire coming out the black section of the horn wire? Seems like thats been added for the aftermarket wheel?