Locking wheel nuts

[Darren_S15]

I have no idea which locking wheel nuts I need for an S15.

Can someone point me in the direction of a fairly decent set of them.

Maybe McGuard ones or something...

Web link would be much appreciated.

Thanks a lot,

Darren

 

[Nicely]

You need ones which fit Nissans

McGuards are the best IMO, but they require quite big holes surrounding the wheel nut to get their adapter to clear. I can't fit them to my alloys because of this And I know quite a few other alloys they wouldn't fit either. I had to go for for a set which have three ins in the key as they were the only ones I could get at the time. They are a right b@stard if you do them up too tight. The pins in the key tend to shear quite easily...

These look OK

 

[Auss15]

Iv'e got Ray's locking nuts on mine and the special key is easy to use as they have a tonge and groove set up so you get good purchase when you undo/tighten them up

 

[Nicely]

Bit like the ones I posted the link to then?

 

[Darren_S15]

Thanks Nicley.

They look like they will do the trick

Ill have a look at my clearance around the nut tonight and if its large Ill get the McGuard, otherwise Ill play safe and get the Kosei one.

 

[Auss15]

Bit like the ones I posted the link to then?

Similar, the locking nut has 7 sides with a groove down one side as seen on the left

 

[Matt_S]

IIRC, they can take a 19mm or 21mm socket too, which is cool

 

[Darren_S15]

Just for the record I ended up getting McGard 25254SU

They are M12 x 1.25.

Fit like a glove

Thanks for the help guys :thumbs: