need some help with wheel offsets

[shifty]

Right. looking at some wheels but not sure if they will fit.with the offset they have. specs are:

17x9.5 et48 17/215/45 - fronts

17x10 et 50 17/235/45 - rears

will these fit a spec r with rolled (not flared) arches or can they be made to fit with spacers?

Thanks for.any help in advance

 

[Adam L]

They'll fit but you'll need at least a 20mm spacer for the front i'd have thought, otherwise you'll foul the coilover. The rear would probably benefit from the same as the stance might look a bit odd otherwise.

 

[NIZAN-R]

i looked at a lot of picks and 9j +20 front 10j +38
will be spot on roll arches and its done
rear camber can be adjusted back to stock camber so no worn tyres

 

[Adam L]

Sorry, you're right. I'm thinking et 20 not 20mm spacer. I run a 9j on the front of my car and had to lower the et down to 20 to have a comfortable gap between the rim and shock, plus the spoke design was fowling on my clippers.

 

[Auss15]

They will look terrible, on a Honda S2000 yes maybe but not a S15. The low to mid 30's is more optimal.