bolts

  1. C

    Flywheel bolts.

    Just fitted my hypermax clutch and flywheel but realised I now need shorter bolts as mine are bottoming out. Do they need to be anything fancy or will normal m10x1 do the trick? also what are the torque settings for them.
  2. S

    FS: Garage clear out, R33 GTR brembos, 360mm disc kit, VVT sprocket, ARP rods bolts + mor

    right having a clear out, 5) S15 good VVT sprocket, come from a S15 with 60K on the clock no noises £75 6) S15 Cams, came from a 60K SR20 £50 11) ARP rod bolts for SR20, never used still in packaging: £40 no doubt there will be some more parts I add as I find them..... will also add...
  3. Max

    S15 flywheel bolts

    Hi, I am about to fit a new clutch, an Exedy Hyper Single. It has some used bolts (never a clever idea to re-fit) so i got some ARP ones off Mazworx but I think the non S15 ones are all shorter, am I still good to use the ARP ones? I can't find any S15 specific ones... Max
  4. B

    FS: Selling all my parts, greddy,tomei,apexi,hks

    Hi, I'm selling all the parts I bought for my s15 as I'm changing my plans and hopefully buying another house, all parts are brand new and never used, in original packaging! Apexi N1 exhaust, it's a 1 piece exhaust and the quality looks awesome full stainless steel with all gaskets and bolts...
  5. N

    WTB: SSR professor sp1 split bolts

    If anyone has a knackard wheel I could do with some spares to rebuild mine. I need the long and short bolts with chromed heads
  6. S

    Need Help with Head Gasket Order....

    After talking with my mechanic, I'm unsure on what head gasket to purchase. Originally I was going to go with a Cosworth metal head gasket. My mechanic said the issue with going to a steel head gasket is the fact it isn't as "forgiving" as an OEM gasket. Meaning, if everything isn't 100% level...
  7. S

    WTB: tramsmission / starter bolts, trans cross member bolts and std cold air feed

    i seem to have mislaid the tranmssion bolts i had for my s15 (i am sure they are in a 'safe' place some where !) so does any one have the following for an S15 Spec-R: transmission to block bolts (all of them ! or some of them) starter motor bolts transmission cross member to vehicle bolts...
  8. JaseYpk

    Turbo Elbow Bolts Missing..

    Not sure how, not sure why, but mine seem to have run away. And as a result my exhaust backbox is kicking out... nothing. my turbo is the exhaust at the moment. haha So why did they come loose, how can i stop them coming loose and running away, and where can i get a set of new bolts from (other...
  9. CMR

    WTB: T28 Compressor Outlet bolts

    Had a bit of an accident last night and now require one of the long turbo compressor bolts from a T28 :wack: Sure someone has one lying around somewhere after a turbo swap. Can anyone help :thumbs:
  10. J

    WTB: Turbo, manifold etc

    Garrett GT2871R turbo HKS adjustable actuator high flow sr20det manifold Braided oil and water lines with banjo bolts 3 inch down pipe (t28)
  11. Tony

    fitting H-dev exhaust manifold.

    Hi guys! Bought a H-dev exhaust manifold, but I havent fitted It yet, Are they difficult to fit? haven't really done this before, All tips and trix are welcome, I was planning to remove the bolts by the turboflange first.. and then remove the bolts on the flange thats on engine side, and just...
  12. B

    Undersealing

    I have been researching on here and I am pretty confident about going ahead and stripping underneath the car and getting it underselaed, inspired by Fruitbooter’s thread. I just wanted to know if the list of stuff I am going to buy is ok, and the order of doing things. Once everything is...
  13. M

    harness fitting

    any body got harnesses fitted in there 15 without a roll cage where did you fit your rear aye bolts to. im going to be using weld in i bolt plates but im unsure where to fit them
  14. CMR

    R33 GTR Brembo Bolts

    Had a search and can find a few threads about the above subject, but no definite answers. I know there are a few people on here running GTR Calipers, what are the bolt sizes did you use for the front? I don't want to have to get the standard bolts machined, would rather buy new in the correct...
  15. S

    Wheel bolts

    Iv just brought some nice new wheel for my specR but need some locking wheel bolts/nuts but require slimmer fitting bolts to fit in to the narrow holes anyone know the size of the stock bolts and thred size ect.
  16. B

    WTB: s15 turbo lines oem

    any one got oem turbo lines + banjo bolts going spare thanks steve
  17. S

    Does the cam cover have special bolts?

    Recently bought a load of Tegiwa washers and bolts and was thinking of swapping the cam cover bolts just took one of the bolts off and it had like a rubber grommet on it, to me a bolts a bolt but thought I would ask on here first.
  18. M

    WTB: s14 flywheel bolts must be new

    as tiltle i need a set of brand new s14 flywheel bolts can be nissan or arp. pm or leave message here. thanks cash waiting. i need s14 bolts as im fitting an exedy s15 clutch kit and it uses the shorter bolts for the flywheel
  19. spoonman

    Oil leak through bolts,

    Ive had a oil leak for a while now and have replaced the crank seal twice thinking it was that, but after giving it another degrease i watched it on the first start up since and noticed oil and a few small bubbles coming out from around the bolts. i thought it might of been the where the bolts...
  20. M

    where to buy flywheel bolts

    hey all. just bought exedy hyper single clutch and flywheel off dean s15 so i will be fitting it when i get home, just wondering if anyone knows where i can buy a set of flywheel bolts from so i can get them delivered to my home address. i would go to Nissan but i work offshore and i would like...
Top