What's new

bolts

  1. JaseYpk

    WTB: Bolts for Rear Arms!

    I need the bolts that connect both ends of the rear camber arms, and rear toe arms. As mine are siezed, and i fear theyre going to round/break when i try to remove them to fit adjustables. Anyone got some? Cheers
  2. K

    XForce elbow fail

    Hey guys, need some help. Tried to install my 3" Stainless XForce system yesterday and ran into some problems. I removed the divider from the elbow as my turbo has its own divider but then i am left with two holes so i pluged them with the divider's bolts. It seems to fit, one of the bolts is...
  3. B

    Spec r flywheel bolts ???

    Hi I'm after some spec r flywheel bolts for the duel mass flywheel, I've tried Nissan but they are struggling to find any. Does anyone know where I can get any from ?? Thanks
  4. S

    Flywheel torque specs..

    Okay, I have searched the repair manual, but it seems I cannot find TQ specs for the 6-speed dual mass flywheel. I can only find the 5-speed specs. Does anyone have the specs or are they the same? I know the bolts are different, so I wanted to double check. Thanks, Austin
  5. D

    FS: Aluminium cooling panel

    Covers the area between the headlights, complete with stainless steel bolts. £35 posted :)
  6. JaseYpk

    Rear Arm Bolts!!

    Does anyone know where i can find replacement bolts for the rear toe and camber arms? i've tried driftworks and cant see any there, our local large garage doesnt have any, and they do alignment?!?! so yeah.. where can i find some pronto? i think theyre a mixture of 17mm and 19mm.. thats only a...
  7. Fruitbooter

    Question about brake hoses

    Just went to fit my HEL hoses and realised they dont fit Grrrrrrrrrr :annoyed: Looks like I should of had a banjo bolt in the pack? Or completley different hoses with banjo bolts already on? Can banjo bolts be put onto these hoses so I can fit them to the calipers? Im going to email HEL...
  8. spoonman

    GUIDE: Weight Saving

    Feel free to add to this. ie interior, flywheels, manifolds........ anything that was lighter then what was there. Removal of engine bay aircon parts. Aircon radiator, bracket, pump, belt, pulley, filter, pipes, bolts. SAVED 13.6kg might put it back in when summer comes around, removed as it...
  9. spoonman

    Snapped Camshaft bolt, what not to do when installing rocker arm stopper

    My rocker arm stoppers from Tomei arrived today, according to the installation instruction that come with them, they say to torque to 11.8Nm the cam nuts, at this low setting i discovered the hard way to make sure the wrench does not move higher then this setting, which happened just by...
  10. Fruitbooter

    Am I too weak or am I doing something wrong?

    I cant get the bloody prop shaft bolts at the diff end out! Ive tried soo hard but nothing :( Ive managed to get 1 out so I know it is as simple as using a spanner lol but I cant get 2 of the others out and I havent even atempted the last one. The thing is im trying that hard, I even used...
  11. T

    Engine bay bolts

    Hi guys, While fiddling about under my bonnet, as you do, i noticed i'm missing a few bolts, and a previous owner has removed the air scoop that feeds the air filter. Does anybody know where i can get the bolts/fixings that hold the front bumper up, i think there are four of them at the very...
  12. pegliobaglio

    Garage D

    As i am sure a few of you may have read i sent my car in friday the 13th to get a helical diff built into my casing,as it had a 2 way in. I came to the decision that i was'nt really going to use the car for anything more than fast road ,and maybe the occasional track day,so after looking around...
  13. Darren_S15

    Fitting Nismo 740cc Injectors

    Here is my guide on how to fit the Nismo 740cc injectors. Use this guide at your own risk, but it worked fine for me When you start your engine bay will look something like this Before I did anything I REMOVED THE BATTERY CABLES and covered the front bumper and wings of the car with some...
  14. S

    Where to get strut bolts?

    Just installing a front strut bar today and had some awful job trying to get the strut bolts off. I think they're 14mm strut bolts, 3 on each tower, they got a little sheared. Just wondering where id get em or would ebay be my best bet and are they actually called strut bolts? Cheers. Sully.
  15. J

    Exhaust advice

    Hi guys, elbow/mani gasket is blowing and has just been getting worse over the last few days ...was following a mate home last night in his 120 horse Vectra with 160k + miles on the clock when all of a sudden, no boost! I could only just keep up with it let alone overtake! :eek: Plus it sounds...
  16. zero260

    Spacer and wheel stud question

    I have just had a trial fit of my new wheels on my car and the fronts are tight up against the strut so spacers will be needed. They are 18x9.5 with a 30 offset and the coilovers are the Apex Gen2 ones. I know I can clear them a bit as the camber is slightly out but has anyone else had this kind...
  17. Darren_S15

    R33 Brembo Bolts for S15?

    So went to fit my new R33 GTR Brembo calipers this weekend and ran into an issue my brake upgrade thread. From everything I read the standard R33 skyline bolts can be used for this but then I went to bolt them on they clearly cannot. As you can see in the photo below the shank on the R33 bolt...
  18. Topper

    Part number request

    Guys, hoping one of you can assist. Need the part number of the the sub-headbolt located inside the head, but ahead of the timing chain (front edge). There are two bolts, presume they are the same, with a large collar from the head to the threads. Cheers :thumbs:
  19. C

    Flywheel bolts

    I've got an ACT organic clutch and ACT Prolite flywheel ready to go in at the weekend, but after Nissan quoteing me £70 for the 8 bolts, is there another solution? I've read on SXOC that people re-use the original bolts, but are s15 bolts useable with a ACT fly? Cheers fellas
  20. J

    WTB: Flywheel bolts wanted (sr20det Spec R)

    Hi all, Has anyone got a set of flywheel bolts to spare? I nearly have all the parts gathered to fit a 6 speed to my 180sx, all im short is the bolts, if anyone has some spare, that would be great, otherwise il just order them from nissan:nod:
17,094Threads
161,001Messages
11,812Members
wayopo2500Latest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
1
Guests online
584
Total visitors
585
Totals may include hidden visitors.
Top