Hey guys, need some help here.
The S15 has 2 fans, 1 clutch fan on the engine, and one electric fan mounted to the radiator/Aircon heat exchanger.
I would like to remove the Clutch fan entirely and just run the electric fan. From what I have read in the owners manual, the electric fan only...
I had an accident last month and car under repairs. my oem radiator fan is broken and having lots of hassle to find one locally. Does anyone know the diameter and specs of the oem fan? Thanks a lot :notworthy:
Does anyone know how to check whether my clutch fan has been installed properly? Which way do the fans face? Are there any markings on the fan to tell you which way it should be installed? I cant see the any markings on them as I currently have the fan shroud on which blocks my view a...
I recently purchased a s15 and have noticed the cooling fan is constantly on, I thought it might be the coolant temperature sensor so bridged the two pins in the consult port to see if a fault came up as the temperature sensor but it came up with no faults. Could it still be the temperature...
Found out yesterday on the hottest day so far that when I installed the electrical fans before Christmas, I hadn't checked them properly (just stuck my hand behind the fan to feel air flow) to make sure they were both sucking air into the engine bay.
One fan is pushing air from the engine...
Standard WMIC pipe
I need these bits ASAP, has anyone got any of them kicking around?
3) long part plastic WMIC pipe that goes from the intercooler over the fan cowling to the inlet manifold.
S15 fan cowling, WMIC pipe to inlet mani and standard bottom arm
I'm after a full fan cowling, LHS bottom arm and the pipe from the WMIC to the inlet manifold for my S15. Let me know if anyone has any lying around.
Noticed the other day while searching parts that other S bodies have an electric fan that sits inside the cowling. My Oct '01 manual Spec S doesn't have one fitted. Is it meant to have one fitted as standard? It has working AC on it..
Im having trouble trying to wire up a fan controller to the factory harness. Has anyone else come across this?
On the ADM harness pin 10 is the Cooling Fan Relay HIGH and is Blue/Green (L/G) in colour, problem being that I have a JDM and there is no wire going to hole 10 in the harness.
Hi guys. Would like a low mileage viscous fan if any of you have one when you've changed to electric.
mine has abit of play and I plan on changing the belts and wouldn't mind swapping the fan for a good one.
About as general as thread titles go that!
Car people generally hate the sport, but always been massive fan, saturday mornings are football accumulators bacon sarnies and soccerAM! All my family are from Birmingham and grown up a Aston Villa fan.... Who are completely terrible this year(most...
All in the title really, dont fancy taking the fan controller sensor out to drill and tap a new hole, so can I splice the depo sensor wires straight into the existing one?
the depo gauge just has 2 wires, black and white for their sensor, existing fan controller has red and black, but dont...
Here is a few pics of the twin electric fan setup i installed a few weeks ago.
Personally i hate the idea of the water pump turning a fan to keep air flowing i know it works but it looks ugly as hell and adds resistance to the engine, i know its very little but i just don't like it, its a old...
Hello my names Alex. People usually call me Hawks! Wierdly the last post was a honda Integra going S15 lol. Im a big fan of hondas, as i have an Integra atm but even bigger fan of Nissans especially Silvias + Skylines :-)
I live in England, South London, Surrey! Im a couple of weeks away from...