pipe

  1. N

    Post FMIC Fitting!

    Hi guys, I have searched for this but theres so many responses im confused. I fitted the FMIC i have last night, I just have one question about a pipe that comes off the stock boost solenoid and it used to connect to the factory intercooler, theres no where for it to go on the new hot pipe...
  2. gaz15

    Quick tap

    Does anyone know where I could get a quick tap from? Just about to fit my FMIC and need it for the boost hose to keep it as short as possible on the hot side. What do you guys recommend, what have you done on yours? Weld a nipple into the hot pipe or quick tap into the silicone. Cheers :D
  3. R

    Metal Intake Pipe

    Hi guys, Looking to get a metal intake pipe for my S15, noticed a few people here using them. Am I right in assuming most people just get them fabricated? Or is there an actual supplier? Any help would be great, Thanks :)
  4. S

    What cat back pipe will fit this exhaust?

    I recently bought my first s15 and it came with a spare back box. I tried to fit it but the joining points don't match up with the standard system. The Jasma plaque identifies it as "Ething KS" which research seems to indicate is a racing division of HKS. It looks like its a 3" exhaust. Just...
  5. Parky

    Throttle body inlet pipe size..?

    I want to change the old black rubber joiner from the intercooler cold pipe to the throttle body but am unsure of what size I need to get, can anyone advise?
  6. V

    WTB: ABS sensor, fan cowling and WMIC pipe

    Standard WMIC pipe Hi guys, I need these bits ASAP, has anyone got any of them kicking around? 3) long part plastic WMIC pipe that goes from the intercooler over the fan cowling to the inlet manifold. Thanks Tom
  7. spoonman

    FS: GReddy T28 DumpPipe (elbow, downpipe)

    GReddy down pipe, for the T28. http://www.frsport.com/GReddy-11920100-Exhaust-Turbine-Turbo-Outlet-Elbow-Pipe--SR20DET_p_771.html Pipe has been used but is in really good condition Has had the center divider cut flat to fit the S15 T28 GReddy dont make these anymore due to the SR20 T28 setup...
  8. gaz15

    WTB: apex stainless intake pipe for OEM AFM

    As above anyone got the apex stainless intake pipe for the OEM AFM for sale, as apexperformance have discontinued it they only have the z32 one, cheers
  9. gaz15

    Stainless intake pipe

    Anyone know where to get the stainless intake pipe for the OEM AFM ? I emailed apexperformance, they only have the intake pipe for the Z32, They have discounted the OEM one :down:
  10. fez06

    thottle body silicone pipe

    Anyone know where I can get a new one from? Iv just ordered a new fmic and want to change the pipe as it looks tatty compared to everything else
  11. P

    Hoses for Fitting R33 GTR Brembos?

    Hi, I picked up a set of brembo calipers (front and rear) removed from an R33 GTR skyline last week. The rear calipers have a bracket holding a short piece of brake pipe that goes into the caliper body with a brake pipe union, and has another brake pipe union into a block onto the end of the...
  12. shib

    Idle Valve

    Gents Does anyone know the size or part number for the pipe between the idle valve and the inter cooler pipe? I'm also after the part number for the bracket on the passenger side door which the door handle on the door card bolts on to. The bracket is held on with 2 screws and looks like this...
  13. paddyb01

    boot gauge pipe

    Only noticed today that my boost gauge is tee'd off the fpr, is it ok to have it like that?
  14. N80Jamie

    Fmic fitment help

    I know a number of people have had problems with fitting the Japspeed style intercooler kits and now I'm one of them! Having problems with the cold pipe (pictured below); the thicker breather pipe is pointing directly downwards onto the fan cover. I've been told by a friend that the best job is...
  15. S

    FS: sr20det full top mount turbo setup, greddy td06-20g pretty much brand new

    Greddy TD06 20G virtual brand new bolted up and was due for mapping but a lack of funds means its got to go. zero play and 100% working perfect Manifold braced and adapted for turbo Custom down pipe with flex to fit standard exhaust, ( sensor not included ) 3 month old genuine 38mm...
  16. Sims77

    Advice please

    I'm fitting my Gruppe M induction kit this weekend and it has a pipe which fits onto the rocker cover breather hole. This means I need to cap off the original pipe. What bung or cover do I need and where can I get one? Will the local Halfrauds have them? Thanks
  17. paddyb01

    WTB: power steering pump inlet pipe

    Looking for the inlet pipe that bolts onto the pump mine is cracked if anyone has a broken pump laying around. Thanks
  18. R

    FS: Blitz boost gauge

    Bought it but never used it. 52mm Mechanical and comes with boost pipe £55 posted 07817028470
  19. tooley

    FS: S15 down pipe

    I have a new flexi pipe so don't need my old on. £40 quick sale :)
  20. fez06

    WTB: S15 3" stainless elbow and down pipe

    came to fit mine today with the s14elbow and down pipe and found its too short, which means no Nur spec for fastshow:down: So if anyone can help me out id be more than greatful :)
Top