subframe

  1. C

    Bushes - solid v poly

    I can't decide what setup to go for with the diff/subframe bushes. Was originally planning to go solid in the diff and subframe but had a re-think and decided to go for solid diff and poly subframe, but still not 100% sure :rolleyes: What combinations are you guys running and what do you think...
  2. S

    FS: wings and subframe

    have a set of pearl white front wings no dents or scratches also have a perfect rear subframe 150 euro each
  3. LuPix_S15

    GUIDE: Fitting Subframe Alloy Locking Collars

    Ok folks, I've always wondered how the metal subframe collars were fitted to an S15 so when I did mine the other day with a mate, I took the chance to take pics so hopefully, those who wanna give this a go will know it's not too difficult. I purchased my set of subframe alloy collars from...
  4. Dan H

    Subframe bushes + locking collars

    I tried (unsuccessfully) to fit a set of subframe locking collars earlier. The top part went on, but the bottom part wouldn't fit up into the bush enough to get the nut started, even if I used a jack to try and push it up in :confused:. Upon further inspection, the bushes (well, the one at the...
  5. S

    WTB: spec r rear subframe (straight)

    need a s15 spec r rear subframe is there one thats traded around for painting ??? could use other bits like front cross member, braces and front and rear lower arms
  6. LuPix_S15

    Fitting Subframe Locking Collars

    Hi guys, I've got some Driftworks alloy subframe locking collars. Basically I've been told you need to loosen and drop the subframe and then these slip on in between existing bushes and the chassis IIRC (??) I've been under and around the diff area recently (replacing diff oil) and had a...
  7. D

    WTB: Clutch pipe + rear subframe mount brace

    Hello I am looking for 2 parts, photos included: rear subframe mount brace clutch assy pipe??? I dont really know whats this part called. Anyway - If anybody has this parts please let me know. Thank you.
  8. richy200

    FS: Shed clearout, some s14, s15 parts.

    I have had a bit of a clearup and no longer need to be keeping these anymore. The engine was changed a few months ago and these few parts have been in my shed ever since. 3 x sr20det manifolds - £10 each im stripping a complete subframe down as i only wanted the subframe so all parts available...
  9. S

    WTB: Wanted S14/S15 Subframe Bush Washer

    have a look at this thread and basically I am missing the large metal washer that the nut screws over so that it compresses the subframe bush. http://www.silviawa.com/forums/index.php?s...mp;#entry639823 I have attached a excerpt from the FSM and the washer I require is circled in red You can...
  10. S

    R33 Subframe

    Is R33 Subframe same as C34 Stagea subframe? I wanna do the conversion to pack out 25mm on each side. I know the C34 Stagea subframe def will but not sure R33 will.
  11. S

    WTB: S15 Rear Subframe

    As above, I need one ^^; if the S14 one is identical (I'm sure it is, but not 100%) I'd take one of those aswell Ta, Rick
  12. G

    WTB: set of doors, winscreen, suspention parts ect..

    hi right i will be looking for: a pair of doors, a full set off glass exept rear 1/4s, a rear subframe with arms, front crossmember, coilovers (possibly), front and rear hubs with discs and calipers front subframe with arms also will s14 parts fit to replace any of the above things...
  13. O

    Subframe questions from the US

    Subframe Help / old_s13 Restoration Project Hi guys, I've posted a few times in the past but usually not relating my car. This time, I need some help and I am hoping someone can chime in with some good info. I spent many many hours searching for information and pics, I wasnt able to find too...
  14. O

    WTB: WTB: S15 Subframe

    Hi guys. Looking for an S15 subframe, arms, and diff. If anyone happens to have one, please let me know. I am restoring my S13 shop vehicle and would like to attain these parts for R&D. I am located here in Los Angeles, CA, USA.. but have contacts in UK that can handle payment and pickup...
  15. S

    Stagea Subframe to pack out rear

    I heard that Stagea rear subframe is bolt on for S15 rear and they can pack out 20-25mm so is it possible?
  16. E

    Any1 know where I can get a vw golf seat subframe?

    Does anyone know where I might be able to get a mk4 golf gti seat subframe for a recaro. I went on www.uk-mkivs.net but you have to have a minimum post of 100 to post in the wanted section lol I have tried ebay, also with no joy.
  17. Roots82

    Sloppy Rear....

    Hey guys, As the weather is getting better i have had a little more confidence in the car and have been trying out all the handling mods i have done to the car over the past few months... New Driftworks CS2 coilovers, Rear camber and toe arms, Rear strut brace, Full alignment using the...
  18. DeanS15

    cobra daytonas

    hey guys, just wanted to know if anyone has a cobra daytona drivers seat fitted and does it foul on anything it shouldnt ie the door or centre console? i want to fit it with the cobra tailored subframe, worried if i bodge the standard one it would sit too high. the subframe they list is for...
  19. F

    rear subframe question

    Are the subframes on the s15's interchangable, The reason Iam asking is that I have an s14 subframe sitting in my garage fitted with solid bushes, all adjustable arms and 2 way diff, Was going to wack it on the s15, but thaught I ask the experts, I have noticed that the subframe does look a bit...
  20. S

    Cracked Subframe Mounts

    A recent casual discussion with a friend sparked my concern about cracks on subframe mounts. I was told by this friend of mine that he had to sell off his much tracked E36 due to cracks found along subframe mounts (cracks happened at Chassis side). My friend described having the sympthoms of...
Top