valve

  1. I

    Rays Valve Caps

    I have some Rays Valve caps in Red and Gunmetal available for next day delivery...as long as the postman behaves! I can deliver for £12! These are shifting fast so give me a shout if you're interested!
  2. M

    FS: spacers and a few other bits

    got three pairs of h and r wheel spacers 25mm 5x 114.3 bolt on hubcentric. only two sets in picture but they all look the same. comes with nuts. just dirty as they've been used. want 80 posted for each pair next we have an xs power wastegate only get what you see in pic no flanges or...
  3. S15_SAM

    Cold idle adjustment / removal. Is it ok to take this bit off.

    I'm looking for advice on the above. I'm sick of my cold idle being 2000rpm and would quite like it to be at normal idle from cold. In my eyes it would be better for the engine on start up, as less wear on the oil starved bearings straight from starting. So I've been looking today at the...
  4. justin666

    Cold start valve and CAS (99 Spec R)

    Hiya Still trying to get to the bottom of my non start so just need two quick answers for stuff that I will be trying next weekend when I can get back up to leicester to work on the car... First up, Where is this cold start valve ive been reading about? Secondly, need a part number for the...
  5. M

    Some pictures of my new 1000+ hp RB28 Mazworx engine

    Just wanted to show you all my new mazworx RB28 engine! Ready to put in one of my s15's :D -RB28 Stroker Engine Specs: Engine:RB26DETT Bore:86.5mm Compression:10.5:1 Stroke:79mm Rod Length:4.783 -Mazworx RB25/26 79mm Billet Crankshaft -Custom CP Pistons (set of...
  6. S

    FS: parts for sale

    clearing out some parts i have left. Standard S15 WMIC with piping £70 delivered Standard S15 rear lights £60 delivered Standard Blow off valve £20 delivered will get pics up tomorrow hopefully cheers
  7. J

    WTB: re-circ valve

    Hi guys im after a re-circ been told these a little better than a dump valve. For S15 Cheers
  8. T

    WTB: Tomei pon cams 256 or 260

    As per title in good condition. Either 256 on there own or 260 with the required uprated valve springs. Cheers Alan:thumbs:
  9. A

    HKS SSQV Recirc...

    Ok, so, my S15 came with an HKS SSQV BOV which sounds great, but im ideally looking to have a recirc BOV. So, after reading up a little i learnt that the HKS can infact be a recirc valve, providing you fit the kit of course. So, my question is, does anyone know where i can purchase the kit to...
  10. Adam L

    Pussy Wagon

    I wouldn't usually do something like this but we were in tears with this car and not just at the slogan the owner proudly had on the keys. It's one of the old GT models but the thing is hanging. The dump valve was making some weird noises that resembled farting too, it's leaking power stearing...
  11. JaseYpk

    "Relief Valve"

    Was browsing and found this: http://www.funkypower.co.uk/catalogue.php?make=NISSAN&model=200SX&year=S15+SILVIA+TURBO&level1=FORCED+INDUCTION&level2=CHECK+VALVE&level3=&id_product=2027 Its a GReddy Relief Valve.. What do they do, is there a stock one fitted, and if so, where, and are they...
  12. V

    Tomei Poncam Type-R for SR20DET (Used for 5,000km only)

    We have a Tomei Poncam Type-R (Part No. 143044) for SR20DET to suit the Nissan Silvia S14 and S15. These camshafts are 256° and 11.5mm lift. Although it is used but the camshafts are in an extremely good condition. These have just traveled 5,000km before it is removed from the vehicle. The...
  13. M

    s15 sr has weak spark

    So I took apart my front end : fenders bumper intercooler. and i took off the valve cover so I can get it powder cotted. When I got it back and went to start my car it don't start. I checked pretty much everything and I cant figure what is the problem. It got fuel, its all grounded and no...
  14. crazymat666

    how to fit bov dump valve :S

    im looking into gettin a bov dump valve as i wanna sort the lag out between gear change :) my mate can fit it for me but are there any additional parts i need and how easy is it to fit? any pics would be appreciated :) cheers
  15. R

    Oil coming out of Dump Valve

    does anyone know why my blow off valve is spitting oil????? i have an SR20DET S15 silvia spec- R, and i notice a couple days ago that my blow off valve was spitting oil. its never done it before!! Can anyone answer this????????? I thought it could be the Turbo seals but after sending my...
  16. I

    Do i realy need a BOV?

    Just a quick one do i realy need a BOV or can i continue to use the OEM recirculation valve? Im fitting a 3071r tubo 256 cams De jetro 740 injectors, will haveing a recirculation valve restrict its performence? I got a turbo smart vee port but with the ARC intake pipe dosent alowe much room for...
  17. Trial_S15

    Wanted; Valve stems & caps

    Hows things, Can any of the traders get the following items and how much each delivered to Ireland? 4 No. Valve stems & caps (in blue) for Bronze 17" Work Emotion CR Kai's 4 No. Valve stems & caps for Bronze 17" Nismo GT4's Thanks, Colin
  18. LuPix_S15

    FS: Blitz Super Sound Dump Valve

    FOR SALE: Blitz Super Sound Dump Valve (S15 Kit) Excellent condition - the kit comes with the unit welded onto a replacement S15 hotpipe so it really is just bolt on and then add the vacuum pipe which takes a feed from the plenum area (can use same feed which supplies the boost...
  19. Curryzz

    Request for dump valve fitment pictues:)

    helloo, i need some insperation on what dump valve to get and how well they fit and where they fit, want to make it look nice and not just bodged on:thumbs:
  20. S15Cro

    Compressor Surge

    Hey, dont know if this has been posted before but here is my question: If I have a Blow Off Valve fitted to the car and I still experience Surge, how can I solve this problem?:confused: I know the BOV is supposed to solve the problem if the turbo has surge but what if it continues to happen...
Top