Changing Brake Discs

[Justified]

hi

anyone have a 'how to' on changing my front brake discs..

looking to upgrade my standard ones..

thanks!

 

[Justified]

http://www.jull.co.uk/mods/brake_discs.html

thanks nicely....

haha

 

[Nicely]

:thumbs:

 

[Topper]

How easy is it to change the rear brakes??

I used your guide for the front brakes, is it the same idea for the rears, i.e. pads out, caliper off, then hit disc off (gently )

 

[Nicely]

You need a calliper winding tool from Halfrauds (other stockist are available ). Easy after that. Not done it yet, so I've not done a guide. Some people have managed it with long-nosed pliers. I tried it once, gave up, and put the car in to have it done.

 

[Topper]

OK, that doesnt mean anything to me, i looked in the service manual and it looks very straight forward :nod:

 

[Nicely]

The calliper is combined with the hand brake. It has a mechanism which stops the calliper piston winding back in by itself. The tool is for making this task significantly easier. Believe me, the service manual assumes you have the Nissan tool for this job...

 

[Albert]

The calliper is combined with the hand brake. It has a mechanism which stops the calliper piston winding back in by itself. The tool is for making this task significantly easier. Believe me, the service manual assumes you have the Nissan tool for this job...

but for what to install disks from M3??? is the stop quickly or what?
Becouse calipers doesn't stop over the entire surface of disk, or?

 

[Nicely]

Are you thinking of the front or back brakes? I've got M3 disc on the front with standard callipers. The pads sit further out annd sweeps more surface. This produces increased stopping power.