What's new

Help on wheels offest asap for clearance

Joined
12 August 2013
Messages
297
Reaction score
0
Points
0
Location
Horsham, West Sussex
Country
Instagram
@liamb91
Hi all

need help, ive just bought some new wheels the fronts are 18x9 ET30 will this clear my coilovers (apexi N1's)? If not what size spacer will i need!

anyone running a similar setup?
 
Joined
8 November 2009
Messages
4,636
Reaction score
44
Points
48
Location
herts,uk
Country
Instagram
@Peglio13
^ sounds about right. Also will depend a lot on what tyre size you run and what camber you are running .
I run 18x9 et20 on the front of mine , fits perfect on a 225/40 tyre so that would be the same offset if you were to run the 10 mm spacer
 
Joined
16 August 2013
Messages
262
Reaction score
0
Points
0
Location
W.Mids
Country
put a 9j et25 on the front of mine to try the other day, tight to the coilover (HSD CS1), less than 5mm clearance an et30 wouldn't fit. Of course, with different wheels and coilovers you might have different results.
 
Joined
26 November 2014
Messages
177
Reaction score
0
Points
0
Location
UK
Country
Mine are 9.5 ET26 and fit fine with 225/40/18 and no spacer. HSD coilovers.
 

S15_SAM

NisSam
Joined
21 February 2011
Messages
1,915
Reaction score
0
Points
0
Location
Chippenham, wiltshire
Country
Must be close Mitch??

So common consensus is 9j needs et25-20. On standars arches! With a slight stretched 225 40!
 
Joined
26 November 2014
Messages
177
Reaction score
0
Points
0
Location
UK
Country
They seem to be okay but I won't be driving the car for four weeks as I'm going overseas so will tweak it if necessary.
 
Top