FS: OS Giken super single clutch kit

[eiden88]

Hi boys n girls,

up for sale is my used but in good working condition os giken super single sd480 clutch kit
it's the pressed steel pressure plate edition which is rated at 480+ hp
Putting this up for sale as it's definitely an overkill for a daily driver with less than 280hp that never sees any track, so I went with a driftworks flywheel and exedy stage 1 clutch, instead of skimming this and getting a new clutch disk...

considering this is 800€ new +shipping+customs from japan I think that 300€ would be a reasonable price

this one http://www.rhdjapan.com/os-giken-super-single-pressed-steel-clutch-kit-nissan-51290


remember : this needs skimming (got a mechanic buddy check this out and he said 1/10 mm skimming is more than enough as it doesn't have any surface scars) and a new 225mm sprung (or not, if you hate your gearbox ) clutch disk

will be putting pics later as soon as I get back this night

pics

Very dirty I know, I'll give it a good clean asap

edit: forgot to say that this will come with brand new grade 10.9 or better grade pressure plate bolts, two used os giken clutch disks (have no use for these ) and a used release bearing with the thingy that holds it... both disks have some meat left on, but springs have some play, so I would get a new one (any 225 mm s14/a disk will do), unless you can use them anyway? flywheel bolts will be included too, but I recommend getting new ones, like ARPs, but any bolt kit for s14 will do as far as it's 10.9 or better grade :thumbs:

thanks for watching

 

[eiden88]

pics added :thumbs:

 

[eiden88]

A friend of mine checked the flywheel and pressure plate today and he said that surfaces are actually fine. He's a mechanic and owns an s14 himself, so he knows what he's taking about. :thumbs:
He said this will work fine even with just putting new clutch disk hub springs, but i would prefer putting new clutch disk and skimming the flywheel 1/10 mm just for a peace of mind

 

[eiden88]

Bump