What's new

What's missing in this?

Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country






Am looking to for these to my car. They are off a z32.

I'm missing some bits (handbrake) not too sure what else!

Thanks!
 

S15_SAM

NisSam
Joined
21 February 2011
Messages
1,915
Reaction score
0
Points
0
Location
Chippenham, wiltshire
Country
Im not 100% but, Back plates, shoes and related bits for the handbrake as cables!
 
Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country
Also will the R33 GTR handbrake cables work? Or does it have to be R32 or s13?

Cheers
 

S15_SAM

NisSam
Joined
21 February 2011
Messages
1,915
Reaction score
0
Points
0
Location
Chippenham, wiltshire
Country
I don't see any back plates? I'm not totally sure tbh Krish as I've never done it and only read about it when researching what you need!
 

drifter

Joined
4 April 2011
Messages
512
Reaction score
10
Points
18
Location
Norfolk
Country
As said you need the backplates, but you can use s13 ones. I used r33 gtst cables. There's a guide on jull.co.uk
 
Joined
30 November 2007
Messages
2,152
Reaction score
0
Points
0
Location
Sunny Tweed Heads
I wouldn't worry about the backing plates, I took mine off to keep the brakes cooler so unless you are driving on dirt roads they wont matter.
 

drifter

Joined
4 April 2011
Messages
512
Reaction score
10
Points
18
Location
Norfolk
Country
I wouldn't worry about the backing plates, I took mine off to keep the brakes cooler so unless you are driving on dirt roads they wont matter.
We're talking about the rear backing plates that hold all the handbrake mech on :)
 
Joined
8 November 2009
Messages
4,640
Reaction score
45
Points
48
Location
herts,uk
Country
Instagram
@Peglio13
Here you go mate , this is the full set up I got for mine

 
Last edited:
Joined
2 September 2012
Messages
180
Reaction score
0
Points
0
Location
Norwich
Country
Sweet. Cheers guys. Will see what I can get hold of!
 
Top