What's new

handbrake

  1. gaz15

    WTB: Yashio Factory Spinner knob

    As above anyone got a new Yashio Factory Spinner knob (handbrake button)?
  2. Lanyard

    WTB: Standard Rear Brakes!

    Being messed around by some idiot on DW about sending my z32 rear handbrake mech out and have no standard rear brakes (and thus no handbrake as i'm running R33 Skyline rear brakes) for the MOT!! Don't care about pads or lines, just need some none sticking s14/15 rear brakes ASAP... Like...
  3. L

    How to adjust handbrake?

    Hi all Just wondering how i adjust/tighten the handbrake (cables)? must be somewhere in the armrest area? Mines worked loose over time like always so need to tighten it before i fit the handbrake button Thanks All Liam
  4. K

    WTB: s15/14 handbrake plastic cover

    Hi, I'm looking for a s15 handbrake plastic cover as mine has tore in two... Cheers kev
  5. L

    WTB: Yashio Factory Gear Knob & Handbrake Button

    Hi Just purchased a Yashio Factory gear gaitor but wanting the gearknob and handbrake button to match Many Thanks Liam
  6. A

    Brake warning lamp came on when i took the handbrake off.

    Brake warning lamp came & stays on today, handbrake & brakes work fine. I think it was when i took the handbrake off to drive away, I swear I heard a noise, is there a connector plugged into the lever somewhere? How do you get to it? Thnx.
  7. P

    WTB: WANTED: Rear Caliper handbrake spring - Right/Offside

    I have just rebuilt my right rear caliper but have lost the handbrake spring on the outside, doh! Can anyone furnish me with one?
  8. Krish

    What's missing in this?

    Am looking to for these to my car. They are off a z32. I'm missing some bits (handbrake) not too sure what else! Thanks!
  9. S

    FS: Garage clearout......Everything must go.......

    Cleaning out the garage and need to sell off my spares to free up some space. All prices are excluding shipping. S15 Spec S (?) stock front brakes. Includes calipers, disks, pads (they will need replacing) and handbrake cables. Willing to split the lot, just pm me with what you want and an...
  10. P

    handbrake lever feels loose....

    Had to change my brake pads before heading home from a track day recently, ever since the handbrake lever can be pulled all the way up without the feeling of it tightening up. The rear brakes do come on a bit when you do this but it does not hold strong. I can't get to the bottom of this - any...
  11. Krish

    WTB: Z32 handbrake assembly

    As above. Cheers
  12. J

    £99.00 Hydraulic Handbrake for Road, Race and Drift! Stainless Steel Handle!

    Hey guys, **NEW AND IMPROVED 2013 DESIGN** Here we have in stock our Hydraulic Handbrake's for Road, Race and Drift now with our upgraded Stainless Steel Handle to fit all 200sx models. Hydraulic Handbrake for Road, Race and Drift. This hydraulic handbrake is ideal for road, race...
  13. S

    WTB: Wanted: Handbrake cable for an S15 Brake Upgrade (R32 GTR Brakes)

    Hey guys, I purchased a complete set of R32 GTR brakes for my S15. I'm getting all 4 calipers, roters, and pads. From the guide, they should just be a straight bolt on. From what I've gathered, I need either an S13 or R33 handbrake cable, or a bracket for my current S15 handbrake cable. Does...
  14. J

    question???

    just wondering is the handbrake cable for s15 the same as one for s14 and s13??
    • john
    • Thread
    • Replies: 0
    • Forum: S15 Chat
  15. J

    handbrake cable and turbo problem!!

    alright lads...problem no 1 :ran into a small problem my handbrake cable needs to be replced i failed on it for the nct...havent been on here in ages and remeber everyone here being great help last time i was:) finding it hard to find a new cable and its needed immediatle as my mechanic has car...
  16. J

    help s15 handbrake cabel/turbo problem!

    alright lads...problem no 1 :ran into a small problem my handbrake cable needs to be replced i failed on it for the nct...havent been on here in ages and remeber everyone here being great help last time i was:) finding it hard to find a new cable and its needed immediatle as my mechanic has car...
    • john
    • Thread
    • Replies: 7
    • Forum: S15 Chat
  17. J

    show me youuuuuuuuur....

    hydraulic handbrake locations :)
  18. Sideways Simon....

    R33 rear brakes- Which handbrake cable do i need??

    As above, just picked a complete rear brake setup of an r33 today.... discs,callipers,and the complete hubs with all the handbrake mechanism.. What handbrake cables do i need to use this on my s15?? will r33 cables do or do i need cables of a 300zx???? And also does anybody have the...
  19. sliding-r

    FS: S15 Standard Brakes ie. front and rear complete, BMC, Standard lines, Handbrake cable

    Hi, these cam off my old S15 with 30K miles S15 Brake master cylinder BMC - £25 Handbrake cables suit s14/5- £20 s15 Rear calipers and disks £40 collection preferred but postage can be arranged at buyers cost. Paypal fees are to be paid by buyer. Thanks for looking..
  20. sliding-r

    Changing my rear brakes to R33 gtst, Question ?

    Hi, i have got together all the bits i need for this conversion i think. Discs + calipers Handbrake assembly R33 handbrake cables and r33 rear hoses So the question is after looking at nicely's guide you need a hub puller, will this fit on the s15 studs...
17,094Threads
161,001Messages
11,800Members
SR_POWAHLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
332
Total visitors
332
Totals may include hidden visitors.
Top