What's new

fmic

  1. S

    WTB: 740's/555's z32 afm fmic cold pipe

    Hi guys im after all of the above.. 740 or 555 nismo or similar injectors a z32 afm pref genuine one and i need the wiring too and a inlet side (cold) fmic pipe if at all possible with a ssqv flange or just a dv take off cash waiting send info and photo's via pm cheers
  2. CMR

    Autobahn88 FMIC Questions

    Just in the middle of fitting my Autobahn FMIC, well, I've retired for the night as it's dark. Got all the old bits off just fitting the new stuff now :nod: Where have people bolted the two top supports for the FMIC core to (as per the pic below) The instructions might as well not have english...
  3. Jay-pan

    Japspeed FMIC problem

    Hi, just trying to fit my Japspeed FMIC but came to a problem when trying to fit the breather pipe from the cold intake pipe to the inlet manifold. Anyone got any ideas or help on what i can do?
  4. dave_t

    FMIC with NO BOV - What breather's to use/What breather's to bung

    Currently fitting my FMIC, and waiting on a couple of hoses and clamps to align it, and finish it off. I will be running NO BOV, * I should also add i WILL NOT be running an aftermarket boost controller (for the time being), so my question is what breather pipes do i bung, and what do i...
  5. T

    safe to fit an fmic?

    hello there! I have a question to all you guys out there that knows more about the s15 then i do. i recently bought myself a s15 spec r, with a pretty much unscrewed engine. now to my question: i have a front mounted intercooler laying in the garage waiting to get installed. but im not sure if...
  6. AllanOrr

    FS: New Japspeed FMIC S15

    Hey guys deciding to sell my FMIC I got from Japspeed a few months ago its still new in the box inc all the pipe work and hoses etc never been used or went near a car, this is the same style as the Type 1 Apex FMIC that goes through the battery tray Japseed have these on their GB @ £199 I...
  7. JaseYpk

    fitting FMIC without Remap?

    Is it a bad idea to fit an FMIC without IMMEDIATELY getting a remap? ie - drive around for a month ( ~800 miles), and THEN get it remapped? cheers
  8. pegliobaglio

    Gauging interest, FMIC group buy

    Hey guys, Been getting bored of waiting for the apex kits to be in stock and have been in touch with a few places about getting a good gb price for a fmic kit, the best place I have been in touch with is j-performance originally I wanted the autobahn 88 kit but they can't offer much in the way...
  9. K

    WTB: s15 hotpipe

    I need a s15 fmic hotpipe... if someone has a spare... please help me on this one. if not i am intrested in a whole set as well. greetings
  10. LuPix_S15

    Cool Tip for FMIC Piping

    Here's a tip my mate told me about today... Our S15's have those razor like edges on the metal frame parts which most of us have FMIC piping going through. I tried using sticky pads but these were cut apart within weeks and over time, the hot or cold pipe can be cut apart pretty nastily if...
  11. Ghost

    FMIC + boost drop

    Just got a fmic and now the boost has dropped to .4 bar. I was expecting a drop but it seems a lot to me. Do I have a boost leak or is that drop normal??
  12. J

    New FMIC wanted, which one is best ad can you point me to a seller

    ok as the title says, im looking for a front mount intercooler for my s15. i have done a few bits already Blits BOV Blits SUS induction JAPSPEED manifold i need to get a FMIC, and then i can pop in the Apexi Power FC and get it re mapped your advice is truely welcome on this as i dont want...
  13. I

    S15 arc fmic

    Has anyone installed a ARC FMIC crossflow on a S15 before i cant find any pics just wana know if im gona run into any problems and see how it looks like fitted
  14. Darren_S15

    BOV hose question

    Since Ive fitted a FMIC Ive been thinking of a way to get a decent hose setup with the standard BOV. My problem is the 32mm hose that comes from the charged side of the intake to the BOV itself. Ive been running pigeon for a while now with the intention of putting the BOV back, so I got myself...
  15. J

    Greddy spec LS fmic VS s15 aero kit - fitment

    Hey guys, would like to ask those of you who have the aero front bars that are running the trust Greddy spec LS FMIC (or any other Greddy spec)... i need to know if the intercooler sits flush so that there is minimal cutting to the bar (where end tanks & piping sits) & natural look is kept, i...
  16. Hunts15

    fmic help

    hey lads jus bought this and very confused on how to fit it got no instruction :( any ideas sourced the thread for fitting a fmic but still kinda lost:confused:
  17. D

    boost lag - causes?

    Hi Guys I've got some pretty crappy turbo lag on the stock T28. I don't hit solid boost until a little over 4200RPM (have an MBC set to approx 1bar) and it doesn't spool 'properly' until about 3500. I've looked down on occasion and seen it at 5,000RPM as 1bar is achieved. I've tightened...
  18. V

    less boost after FMIC

    i fitted my FMIC recently and noticed my boost is alot more stable, it used to spike to .9 bar, now on full shoe it will only rise to .6 bar and rarely spike over it, anu suggestions what it could be? also does any body know can the standard ecu be mapped or do i need a PFC?? its just they...
  19. V

    HELP vaccum pipes on fmic pipe

    i bought myself a greddy front mount and it only has one output on the hard pipe, where as the standard I.C pipes hav two outputs!! do i just tee off the single output? i cant get pics up to explain but i hope these words are enough, its the same FMIC as savage-civic on here if thats any help...
  20. T

    intercooler help

    can anyone help with this prob or has anyone had it happen to them (been up all night racking my brains:annoyed:. just fitted a greedy fmic to my S15 and im getting over boost around 4500 rpm the only outher things iv done but they were before the fmic were the free boost upgrade(remove the...
17,094Threads
161,001Messages
11,814Members
TumenPrelestLatest member

About Us

This owners club has been made in the benefit of owners of the Nissan Silvia chassis, allowing them to socially integrate and share their knowledge and advice.

We also intend to create events and social activities for members to take part in to help members meet and get to know each other.

Important Links

Forum Rules
Becoming a Trader
Support us with Premium Membership
About the Silvia Owners Club
Nissan FAST Download

Online statistics

Members online
0
Guests online
576
Total visitors
576
Totals may include hidden visitors.
Top