gauge

  1. T

    The Shinra Car

    Howdy folks, I've been lurking for a good while here taking in all the helpful knowledge you guys bound around and as my iPhone camera is now working I thought I'd share my S15 with you all :) So far: Under The Bonnet: HKS Front Mounted Intercooler HKS Powerflow Air Filter HKS Coilovers HKS...
  2. 2fst4u

    Boost/Vacuum/hoses questions

    Hey guys, have a few questions that I'm having trouble finding answers to myself: 1. Where is the best place to tee a boost gauge? Before you start with the two-word answers (Intake manifold), I ask this because there are quite a few nipples around that general area. Are any of them more...
  3. AllanOrr

    FS: Mega Parts Sale

    Well here is the rest of the parts I will be selling from my S15 Build before I start buying parts to put it back on the road to sell on :cry:This will be only on S15oc.com till this time next week when I put it onto SXOC aswell and knowing they guys the stuff will go fast so yous load have a...
  4. CMR

    Fuel gauge / Sender issue

    Hi, I have a slight issue with my fuel gauge or sender, basically fill the car up and it registers full on the gauge no problem and will continue to register the right amount of fuel until just below the half way mark. As soon as the fuel level drops below half a tank, the gauge will drop...
  5. J

    WTB: Apexi gauge Holder

    Hello, I'm searching for a Apexi Gauge Holder 60 mm. greetz Jay
  6. E

    AEM Boost Gauge Wiring

    Hi, today I tried to fit an AEM boost gauge to my S15 but I'm having odd wiring problems. I'm putting it in the A pillar pod to replace the standard gauge. The AEM in pretty simple - it wants permanent 12v, switched 12v, illumination and ground. I took the original gauge out and identified all...
  7. JonoS15

    FS: Nissan Silvia S15 Spec R Turbo 6 Speed for sale - Needs to go ASAP

    The time has come that i have to sell my pride and joy :-( i am buying a new house and so she has to go ASAP. Extremely good car, still runs and drives awesome considering the age. Well looked after, with no major mechanical problems. Tax until end of march 12 MOT till end of April 12...
  8. T

    WTB: Gauge custer/clocks/speedo

    Hi guys, I am in need of a set of clocks for a manual Spec-R please. Mine seem to have died. If they had 89,000 miles on them they would be superb but anything considered. I would like as much of the surrounding plastic trim as possible because mine is all scratched where it looks like it has...
  9. B

    WTB: few s15 parts

    hi there, i´m searching for a few s15 spec-r parts. - a-pillar right side for boost gauge - oem boostgauge - plug or complete wiring for the boostgauge - oem boost gauge solenoid include plug or complete wiring - spec-r struts from the front, trunk and rear subframe please let me know. i´m...
  10. 70YSR

    help - temperature gauge dropping!!

    hey guys just wondering if anyone would know why.. when my car hits about 3.5k rpm my standard temperature gauge drops a little and by about 4k its reading about 1/4 not halfway like it should. However if the revs drop back below that the temp gauge goes back up to normal and it sits there as...
  11. S

    FS: my breaking thread. tonnes of expencive and hard to find parts

    New additions S14/15 whiteline antiroll bars £125 each or £225 for the pair rear is rusty Engine spec: • Arias Piston Kit • Eagle H Beam Rods • ARP Head Stud Kit • Brian Crower Stage 2 Camshafts (IN 264 and EX 264) • Brian Crower Uprated valve springs • Cometic Metal Head Gasket 1.6mm •...
  12. V

    mounting defi meters in a/c vent

    Is there any how to here ? i search gauge setup or meter setup with no results. thanks all
  13. B

    FS: Nissan S15 - Nismo gauge cluster - new/original boxing

    i have for sale a new and original boxed Nismo gauge cluster for Nissan S15. its located in germany. please ask for shippingquote. price: 550,- Euro
  14. S

    S15 jdm oem boost gauge wires

    Need some help wiring my S15 jdm oem boost gauge to the a-pillar wires, can someone show me which colour wires match up (a-pillar --> boost gauge)? I removed the white clip off the apillar a while back when i changed the boost gauge and now I decided to put oem back on. Wires from the boost...
  15. J

    WTB: Spec S non boost gauge A pillar panel

    Looking for a drivers side Spec S a pillar panel as im removing the stock boost gauge and panel etc which is also now for sale in mint condition. thanks :)
  16. pegliobaglio

    oil sandwich plate

    Anyone know where I can get a decent sandwich plate from? Have just fitted a defi oil temp gauge and need a plate for the sensor,any ideas?
  17. R

    installing boost gauge problems?

    Having trouble installing a manual boost gauge into my ADM S15, can't quite work out the right hose to put the t-piece into. I have searched heaps, but all the pics I see don't quite match up with my car so its hard to work out. Can you use the hose going into the top of the stock BOV, if so...
  18. M

    Just got a standard s15

    Hi guys, I'm happy that fnally i can be a part of this forum... just bought myself a pewter s15 spec-r A/T... with not working boost gauge and central lock. Thinking of getting some wheels first and probably some body kit and repaint. any advice will be appreciated. Thank you :wave:
  19. E

    full exhaust on stock jdms15

    hey people new to this just asking some stuff if i put a full turbo back on a stock jdms15 will my factory boost gauge still show 0.5 peaking 0.6 bar or will it go to about 0.9bar with full turbo back????
  20. M

    WTB: spec s "A" pillar trims and ganador mirrors.

    after those parts in used condition. i would like the A-pillar trim without the gauge holder. will trade for spec-R one with holder or cash. any of the ganador range is fine :)
Top