What's new

Poly bushes & suspension arms etc..

Joined
15 June 2010
Messages
492
Reaction score
1
Points
0
Location
Gloucester
What bushes you use? It's one of my plans do over winter.

Also looking at changing all the arms . Any good arms ? Other than using driftworks ones...
 

S15_SAM

NisSam
Joined
21 February 2011
Messages
1,915
Reaction score
0
Points
0
Location
Chippenham, wiltshire
Country
I've got apex rear rose jointed camber arms, bushed traction arms and Driftworks pollybushed rest of the rear arms. With energy subframe bushes and front torsion arms.

Overall the energy bushes are better quality.
I would only buy apex bushed arms for a road car as the rose joints are a harsh. But as yours is a show car it won't matter.
 

mattyb

Joined
28 October 2011
Messages
302
Reaction score
0
Points
16
Location
gateshead
Country
I would advise against driftworks poly bushes i had no end of bother with them not fitting the rear lower arms, and to be honest there pretty soft anyway.

Power-flex or nismo

I also had a mountain of trouble with the driftworks rise jointed arms. There fine for track days and drifting but the roads in this country are just too rough for them and they wear them out too quickly.

Dw replaced all of my rose joints under warranty (good on them) but 2 month later they had play in them again.

The apex ones are supposed to be good but cnt comment as they were out of stock when i tried to order so i never got them.
 
Top